Polyether_Polyether Polyol Knowledge Benzanthrone Benzanthrone

Benzanthrone Benzanthrone

Benzanthrone structural formula

Structural formula

Business number 01SP
Molecular formula C17H10O
Molecular weight 230.26
label

7H-Benz[de]anthracen-7-one,

1,9-Benz-10-anthrone,

Aromatic aldehydes, ketones and their derivatives

Numbering system

CAS number:82-05-3

MDL number:MFCD00003585

EINECS number:201-393-3

RTECS number:CX5075000

BRN number:1455646

PubChem number:24846308

Physical property data

1. Properties: light yellow needle-like crystals

2. Density (g/mL, 25/4℃): Uncertain

3. Relative vapor density (g/ mL, air=1): Uncertain

4. Melting point (ºC): 170

5. Boiling point (ºC, normal pressure): Uncertain

6. Boiling point (ºC, 5.2kPa): Uncertain

7. Refractive index: Uncertain

8. Flash point (ºC): Uncertain

9. Specific rotation (º): Uncertain

10. Autoignition point or ignition temperature (ºC): Uncertain

11. Vapor pressure (kPa, 25ºC): Uncertain Determined

12. Saturated vapor pressure (kPa, 60ºC): Uncertain

13. Heat of combustion (KJ/mol): Uncertain

14. Critical Temperature (ºC): Uncertain

15. Critical pressure (KPa): Uncertain

16. Log value of oil-water (octanol/water) partition coefficient: Uncertain

16. p>

17. Explosion upper limit (%, V/V): Uncertain

18. Explosion lower limit (%, V/V): Uncertain

19. Dissolution Properties: Insoluble in water, soluble in ethanol and other organic solvents. Dissolves in sulfuric acid to form an orange liquid with red light and green fluorescence.

Toxicological data

1. Acute toxicity:

Rat abdominal LD50: 1500 mg/kg;

Mouse abdominal LD50: 290mg/kg;

2. Subacute toxicity: rat caliber TDL0: 15 gm/kg/30D-I; mouse skin LD50: 117 gm/kg/34W-I

3. Teratogenicity: human lymphocytes: 3300 ug /L

Ecological data

None yet

Molecular structure data

1. Molar refractive index: 71.76

2. Molar volume (cm3/mol): 178.9

3. Isotonic specific volume (90.2K ): 494.4

4. Surface tension (dyne/cm): 58.3

5. Polarizability (10-24cm3): 28.45

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): 4.3

2. Number of hydrogen bond donors: 0

3.  Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 0

5. Topological molecular polar surface area (TPSA) 17.1

6. Number of heavy atoms: 18

7. Surface charge: 0

8. Complexity: 348

9. Number of isotope atoms: 0

10. Determine the number of atomic stereocenters: 0

11. Uncertain the number of atomic stereocenters: 0

12. Determine the number of chemical bond stereocenters: 0

13. The number of uncertain stereocenters of chemical bonds: 0

14. The number of covalent bond units: 1

Properties and stability

This product is toxic. If the human body comes into direct contact with it or operates in its dust, it will cause dermatitis, eczema and skin turning brown and black, and even cause adverse effects on the liver and stomach. Mice were intraperitoneally injected with LD50: 603mg/kg. The production workshop should have good ventilation, the equipment should be sealed, and operators should wear protective equipment.
 

Storage method

Store sealed in a cool, dry place.

Packaged in iron drums or cardboard drums, lined with plastic bags, with a net weight of 50kg or 100kg per drum. Store in a cool, dry place. Store and transport according to regulations on toxic chemicals.

Synthesis method

It is obtained by reacting anthraquinone and glycerol through the following steps. (1) Anthraquinone is reduced with iron powder in the presence of copper sulfate to form hydroxyanthrone. (2) Glycerol loses water and turns into acrolein under the action of concentrated sulfuric acid. (3) In the presence of sulfuric acid, hydroxyanthraquinone and acrolein add together and lose a molecule of water to form a new ring. (4) Then use sulfuric acid to oxidize to benzanthrone. Raw material consumption quota: anthraquinone (98%) 900kg/t, glycerol 600kg/t, zinc powder 440kg/t, copper sulfate (96%) 205kg/t, sulfuric acid (100%) 5000kg/t.

Purpose

Important dye intermediates, used to produce reduced brilliant green FFB, reduced olive green B, reduced olive T, reduced gray M, reduced black BBN, etc.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/15244

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search