Polyether_Polyether Polyol Knowledge Ethyl p-Hydrobenzoate

Ethyl p-Hydrobenzoate

Ethyl paraben structural formula

Structural formula

Business number 03C9
Molecular formula C9H10O3
Molecular weight 166.17
label

Ethyl paraben,

Ethylparaben,

Ethyl 4-Hydroxybenzoate,

Ethylparaben,

Nipagin A,

preservative,

Bacteriostatic agents; aromatic carboxylic acids and their derivatives

Numbering system

CAS number:120-47-8

MDL number:MFCD00002353

EINECS number:204-399-4

RTECS number:DH2190000

BRN number:1101972

PubChem number:24847055

Physical property data

1. Properties: Colorless crystals or white crystalline powder, with a slight fragrance and a slightly astringent taste.

2. Relative density (25℃, 4℃): 1.078131

3. Relative vapor density (g/mL, air=1): Uncertain

4. Melting point (ºC): 116~118

5. Boiling point (ºC, 0.67kpa or 5 mmHg): 297.5

6. Refraction Rate: Uncertain

7. Flash point (ºC): Uncertain

8. Specific rotation (ºC): Uncertain

9. Autoignition point Or the ignition temperature (ºC) is uncertain

10. Vapor pressure (kPa, 25ºC): Uncertain

11. Saturated vapor pressure (kPa, 60ºC): Uncertain

p>

12. Heat of combustion (KJ/mol): Uncertain

13. Critical temperature (ºC): Uncertain

14. Critical pressure (KPa): Uncertain Determine

15. The logarithmic value of the oil-water (octanol/water) partition coefficient: Uncertain

16. The upper limit of explosion (%, V/V): Uncertain

17. Lower explosion limit (%, V/V): Uncertain

18. Solubility: Dissolved in water, solubility is 0.070% (20℃), 0.075% (25℃). Stable to light and heat, non-hygroscopic. Slightly soluble in water. Easily soluble in ethanol and propylene glycol.

Toxicological data

1. Acute toxicity: rat oral LD50: >200 mg/kg

Mouse oral LC50: 3mg/kg

Mouse peritoneal cavity LC50: 520mg/ kg

Dog oral LD50: 5 mg/kg

Guinea pig oral LD50: 2 mg/kg

Rabbit oral LD50: 5 mg/kg

2. Other multiple dose toxicity: Rat oral TDLo: 504mg/kg/12W-C;

3. Reproductive toxicity: Rat oral TDLo: 45600 mg/kg/8- 12D.

4. Mutagenicity: Escherichia coli: 10mmol/L;

Hamster fibroblasts: 250mg/L

Ecological data

None yet

Molecular structure data

1. Molar refractive index: 44.54

2. Molar volume (cm3/mol): 142.2

3. Isotonic specific volume (90.2K ): 366.9

4. Surface tension (dyne/cm): 44.2

5. Polarizability (10-24cm3): 17.65

Compute chemical data

1. Hydrophobic parameter calculation reference value (XlogP): 2.5

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 3

4. Number of rotatable chemical bonds: 3

5. Number of tautomers: 3

6. Topological molecular polar surface area (TPSA): 46.5

7. Number of heavy atoms: 12

8. Surface charge: 0

9. Complexity: 148

10. Number of isotope atoms : 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the chemical bond configuration Number of centers: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

This product is a highly bactericidal substance with a phenol coefficient of 8.0. Very low toxicity and no irritation to human skin.

Storage method

1. Packed in iron drums lined with plastic bags. There are no special requirements for storage and transportation.

Synthesis method

1. It is esterified from p-hydroxybenzoic acid and ethanol and then refined.

2. Main Using esterification method. Parahydroxybenzoic acid is first produced by reacting potassium phenolate with carbon dioxide under pressure, and then performs an esterification reaction between parahydroxybenzoic acid and ethanol in the presence of a sulfuric acid catalyst, and finally undergoes washing, decolorization, recrystallization, centrifugal dehydration, and drying. have to.

Purpose

1. Parabens are one of the commonly used preservatives. It can inhibit the activity of respiratory enzymes and transfer enzymes of microbial cells, and destroy the cell membrane structure of microorganisms, thus having a wide range of antibacterial effects on molds, yeasts and bacteria. Its antibacterial ability is stronger than sorbic acid and benzoic acid, and its antibacterial effect is not greatly affected by the pH value. The effect is good within the pH value range of 4 to 8. Our country stipulates that for pastry fillings, the maximum dosage is 0.5g/kg (calculated as parahydroxybenzoic acid, the same below); in juice (leaf) beverages, jams (excluding cans), and soy sauce, the maximum dosage is 0.25g/kg; in The maximum dosage in carbonated drinks and egg yolk fillings is 0.2g/kg; the maximum dosage in vinegar is 0.1g/kg; the maximum dosage in fruit and vegetable preservation is 0.012g/kg.

2.Used as preservatives, bacteriostatic agents, cosmetics, and pharmaceuticals.

3. Used as an antioxidant in vegetable oils.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/15291

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search