Polyether_Polyether Polyol Knowledge Isopentyl propionate Isopentyl propionate

Isopentyl propionate Isopentyl propionate

Isoamyl propionate structural formula

Structural formula

Business number 02S6
Molecular formula C8H16O2
Molecular weight 144.21
label

3-Methyl-1-butanol propionate,

3-Methyl-1-butylpropionic acid,

3-Methyl-1-butanol propionate,

3-Methyl-1-butyl propionate,

Isoamyl propionate,

non-reactive diluent,

spices,

Extracting agent

Numbering system

CAS number:105-68-0

MDL number:MFCD00048611

EINECS number:203-322-1

RTECS number:NT0190000

BRN number:None

PubChem number:24900849

Physical property data

1. Properties: colorless and transparent liquid with apple aroma. [1]

2. Melting point (℃): -73[2]

3. Boiling point (℃): 156[3]

4. Relative density (water = 1): 0.871[4]

5. Relative vapor Density (air=1): 5.0[5]

6. Saturated vapor pressure (kPa): 0.27 (25℃)[6]

7. Heat of combustion (kJ/mol): -4840.0[7]

8. Octanol/water partition coefficient: 2.760[8 ]

9. Flash point (℃): 47.78 (CC) [9]

10. Solubility: slightly soluble in water , miscible in ethanol and ether, insoluble in glycerol and propylene glycol. [10]

11. Viscosity (mPa·s, 15ºC): 1.377

12. Heat of evaporation (KJ/mol): 37.97

13. Heat of formation (KJ/mol): 588.2

14. Specific heat capacity (KJ/(kg·K), 20ºC, constant pressure): 1.92

15. Volume expansion coefficient (K-1): 0.00108

16. Relative density (25℃, 4℃): 0.8650

17. Refractive index at room temperature ( n25): 1.4036

Toxicological data

1. Acute toxicity[11]

LD50: 4355mg/kg (rat oral); 6900mg/kg (rabbit oral ); 4355mg/kg (rabbit transdermal)

2. Irritation No data yet

Ecological data

1. Ecotoxicity No data available

2. Biodegradability No data available

3. Non-biodegradability No information available

4. Other harmful effects[12] This substance may be harmful to the environment, and special attention should be paid to water bodies.

Molecular structure data

1. Molar refractive index: 40.84

2. Molar volume (cm3/mol): 164.4

3. Isotonic specific volume (90.2K ): 372.5

4. Surface tension (dyne/cm): 26.3

5. Dielectric constant:

6. Dipole moment (10-24cm3):

7. Polarizability: 16.19

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 2

4. Number of rotatable chemical bonds: 5

5. Number of tautomers: none

6. Topological molecule polar surface area 26.3

7. Number of heavy atoms: 10

8. Surface charge: 0

9. Complexity: 97.4

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Stability[13] Stable

2. Incompatible substances[14] Strong oxidizing agent

3. Polymerization hazard[15] No polymerization

Storage method

Storage Precautions[16] Stored in a cool, ventilated warehouse. Keep away from fire and heat sources. The storage temperature should not exceed 37℃. Keep container tightly sealed. should be kept away from oxidizer, do not store together. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

It is produced by esterification reaction using propionic acid and isoamyl alcohol as raw materials and sulfuric acid as catalyst. Operation example: Mix 3 kg of propionic acid, 2.3 kg of isoamyl alcohol, and 250 g of sulfuric acid, then heat and reflux for 8 hours. After cooling, separate the lower layer of sulfuric acid liquid, first wash it twice with water, then wash it once with 10% sodium carbonate, and finally wash it with water again. The aqueous layer is separated and dried with 10% potassium carbonate, and the fraction at 159-162°C is collected by fractionation as the finished product.

Refining method: often contains free Impurities such as acids and alcohols and amyl propionate. During refining, wash with potassium bicarbonate solution, dry with anhydrous sodium sulfate or potassium carbonate and then rectify.

Purpose

1. Used to blend apple, pineapple, pear, strawberry and other spices, and also used for artificial flower essential oils. Used as cold food, bread and chewing gum flavoring.

2. Used as a solvent to dissolve nitrocellulose, nitrocellulose paint and resin.

3. Used as solvent and extraction agent. [17]

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/15907

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search