Polyether_Polyether Polyol Knowledge p-Benzoquinone p-Benzoquinone

p-Benzoquinone p-Benzoquinone

Structural formula of p-benzoquinone

Structural formula

Business number 02TP
Molecular formula C6H4O2
Molecular weight 108.09
label

Benzoquinone, benzoquinone,

To quinone,

1,4-benzoquinone,

1,4-benzenedione,

1,4-Benzoquinone,

1,4-Cyclohexadiene dioxide,

Quinone,

2,5-Cyclohexadiene-1,4-dione,

p-Quinone,

Polymerization inhibitor,

dye intermediates,

rubber antioxidant,

polymerization initiator,

chlorinating agent,

Oxidizing reagent

Numbering system

CAS number:106-51-4

MDL number:MFCD00001591

EINECS number:203-405-2

RTECS number:DK2625000

BRN number:773967

PubChem ID:None

Physical property data

1. Characteristics: Golden yellow prismatic crystals with pungent odor. [11]

2. Melting point (℃): 115.7[12]

3. Boiling point (℃): 293 (Sublimation)[13]

4. Relative density (water = 1): 1.32[14]

5. Relative vapor density (air = 1): 3.73[15]

6. Saturated vapor pressure (kPa): 0.01 (25℃)[16]

7. Critical pressure (MPa): 5.96[17]

8. Octanol/water partition coefficient: 0.2 (calculated value)[18]

9. Flash point (℃): 38~93 (CC) [19]

10. Ignition Temperature (℃): 560[20]

11. Explosion limit (%): 13.5[21]

12 .Lower explosion limit (%): 1.7[22]

13. Solubility: Slightly soluble in water, soluble in hot water, ethanol, ether, and alkali. [23]

Toxicological data

1. Acute toxicity[24] LD50: 130mg/kg (rat oral)

2. Irritation No information available

Ecological data

1. Ecotoxicity[25]

LC50: 0.125mg/L (96h) (rainbow trout); 0.045mg/L ( 96h) (fathead minnow)

EC50: 2.09mg/L (5~30min) (photobacteria, Microtox toxicity test)

2. Biodegradability [26]

Aerobic biodegradation (h): 1~120

Anaerobic biodegradation (h): 4~480

3. Non-biodegradability[27] Photooxidation half-life in air (h): 0.66~6.6

Molecular structure data

1. Molar refractive index: 27.13

2. Molar volume (cm3/mol): 8�3)[3].

1,4-Benzoquinone The representative use is as a co-oxidant in the palladium acetate catalytic reaction to re-oxidize the Pd(0) produced after reduction and elimination into Pd(II) and enter the catalytic cycle. For example, the oxidative coupling reaction between olefins and acetic acid is achieved with 0.1 times the amount of palladium acetate and 1 times the amount of 1,4-benzoquinone (Formula 4)[4]. The 1,4-benzoquinone and palladium acetate oxidation system can also achieve the conversion of 1,3-cyclohexene into 1,4-acetoxy-2-cyclohexene with a high yield (Formula 5)[5 ], the reaction product will be affected by other adducts. For example, in the presence of lithium acetate, the main product of the reaction is trans-diacetoxy compound; in the presence of lithium acetate and lithium chloride, , the main product of the reaction is cis-diacetoxy compound.

In addition, the 1,4-benzoquinone and palladium acetate oxidation system can also realize the conversion of methylsilane enol ether to conjugated enone, and the reaction has very good regioselectivity and stereoselectivity ( Formula 6)[6]. Combining 1 part of manganese oxide reagent, 0.05 part of palladium acetate and 0.2 part of 1,4-benzoquinone can also achieve the oxidative ring-closure reaction of 1,5-hexadiene, and obtain cyclopentane derivatives with high yield (Formula 7) [7].

1,4-Benzoquinone Another important class of reactions is as dienophiles. Because of the electron-withdrawing effect of the carbonyl group, 1,4-benzoquinone is a good electrophile, and the Diels-Alder reaction can be easily achieved in the presence of electronegative diene substrates. A typical example is the Diels-Alder reaction of 1,4-benzoquinone and 1-methyl-1,3-cyclopentadiene in the total synthesis of Capnellene reagent, which provides a good reaction precursor for the final product ( Formula 8)[8]. In addition, there are many reports on the asymmetric Diels-Alder reaction involving 1,4-benzoquinone (Formula 9)[9].

It is worth emphasizing that 1, Another important use of 4-benzoquinone is in the synthesis of 5-hydroxyindole derivatives (Formula 10)[10]. The reaction is very simple and has a wide substrate selectivity.

5. Used as dye intermediate , used in the analysis to determine amino acids. [32]

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/16258

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search