Polyether_Polyether Polyol Knowledge Adipic acid Adipic acid

Adipic acid Adipic acid

Adipic acid structural formula

Structural formula

Business number 03HN
Molecular formula C6H10O4
Molecular weight 146.14
label

Fatty,

1,6-adipic acid,

1,4-butanedicarboxylic acid,

Hexanedioic acid,

1,4-Brtame dicarboxylic acid,

1,4-Butanedicarboxylic acid,

dicarboxylic acid,

sour agent,

sourness modifier,

pH adjuster,

acidic solvent

Numbering system

CAS number:124-04-9

MDL number:MFCD00004420

EINECS number:204-673-3

RTECS number:AU8400000

BRN number:1209788

PubChem number:24845230

Physical property data

1. Properties: White crystal, odorless, slightly sour, with the smell of burning bones.

2. Density (g/mL, 25/4℃): 1.366

3. Relative density (20℃, 4℃): 1.099153

4. Melting point (ºC): 153

5. Boiling point (ºC, 101kpa): 337.5, 159.5ºC

6. Gas phase standard heat of combustion (enthalpy )(kJ·mol-1): -2925.16

7. The gas phase standard claims heat (enthalpy) (kJ·mol-1): – 865.04

8. Flash point (ºC): 196

9. Standard heat of combustion (enthalpy) of crystalline phase (kJ·mol-1): -2795.87

10. The standard claimed heat (enthalpy) of the crystal phase (kJ·mol-1): -994.33

11. The standard entropy of the crystal phase ( J·mol-1·K-1): 219.8

12. Crystal phase standard hot melt (J·mol-1·K-1): 196.5

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC) : 567.85

15. Critical pressure (MPa): 3.85

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17 . Explosion upper limit (%, V/V): Undetermined

18. Explosion lower limit (%, V/V): Undetermined

19. Solubility: Easily soluble in ethanol , acetone, slightly soluble in ether, slightly soluble in water, insoluble in benzene and petroleum ether.

Toxicological data

1. Skin/eye irritation: rabbit eye standard Drez eye dye test: 200mg/24H has a moderate irritating effect on the eyes

2. Acute toxicity: rat oral LD5O:> 11gm/kg

Rat transperitoneal LD5O: 275mg/kg

<�It can also be prepared by oxidizing cyclohexanol to cyclohexanone with potassium permanganate. [1]

Purpose

1. Mainly used as raw material for nylon 66 and engineering plastics. Secondly, it is used in the production of various ester products, used as plasticizers and advanced lubricants. In addition, adipic acid is also used as a raw material for polyurethane elastomers and as an acidifier for various foods and beverages. Its effect is sometimes better than that of citric acid and tartaric acid. Adipic acid is also a raw material for pharmaceuticals, yeast purification, pesticides, adhesives, synthetic leather, synthetic dyes and fragrances.

2. Adipic acid has a soft and long-lasting sour taste, and the pH value changes little within a large concentration range, making it a good pH regulator. It can be used for jelly powder and solid beverage powder, with the maximum usage amounts of 0.15g/kg and 0.01g/kg respectively.

3. Used as chemical reagents, also used in plastics and organic synthesis.

4.Used as analytical reagents. Used in synthetic plastics and polyurethane foams.

5.Raw materials for organic synthesis, fine chemicals and the manufacture of polymer materials, used to manufacture polyester resin. It is also used in the synthesis of esters such as diethyl adipate, dibutyl adipate and diisooctyl adipate. It is an important raw material for the manufacture of nylon 66 and polyurethane foam, and is also a raw material for the synthesis of medicines and spices. It is also used as a lubricant, pH regulator and in the manufacture of plasticizers, insecticides and adhesives. In the food industry, it is used as a sour agent, buffer and flavoring agent for beverages and fruit juices, and is also used in the preparation of wine and processed cheese. Used in oils and fats to improve oil quality and used as a buffer to prevent browning of most fruits. Due to its low hygroscopicity, it can be used to make solid powdered juice.

6. Reference product for calibration of alkali and potassium permanganate, made of plastics and organic synthesis.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/16615

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search