Polyether_Polyether Polyol Knowledge Succinic Anhydride Succinic Anhydride

Succinic Anhydride Succinic Anhydride

Succinic anhydride structural formula

Structural formula

Business number 02WU
Molecular formula C4H4O3
Molecular weight 100
label

Succinic anhydride,

2,5-Tetrahydrofurandione,

Tetrahydrofuran-2,5-dione,

Butanedioic anhydride,

Succinyl anhydride,

2,5-Diketotetrahydrofuran,

Aliphatic carboxylic acids and their derivatives,

acidic solvent

Numbering system

CAS number:108-30-5

MDL number:MFCD00005525

EINECS number:203-570-0

RTECS number:WN0875000

BRN number:108441

PubChem number:24854387

Physical property data

1. Properties: Colorless rhombic prism needle-like or flaky crystals. Sensitive to moisture.

2. Density (g/mL, 25℃): 1.234

3. Relative vapor density (g/mL, air=1): 3.5

4. Melting point (ºC): 120

5. Boiling point (ºC, normal pressure): 261

6. Relative density (20℃, 4℃): 1.2340

7. Refractive index (D20): 1.47

8. Flash point (ºC): 157

9. The standard heat of combustion (enthalpy) of the crystal phase (kJ·mol-1): -1538.1

10. The standard heat (enthalpy) of the crystal phase (kJ·mol-1): -607.6

11. Vapor pressure (mmHg, 92ºC): 1

12. Saturated vapor pressure (kPa, ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa) : Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

p>

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: Slightly soluble in water and ether, soluble in chloroform, carbon tetrachloride, and ethanol.

Toxicological data

1. Skin/eye irritation

Standard Draize test: rabbit, eye contact: 750μg, severity of reaction: severe.

2. Acute toxicity: Rat oral LD50: 1510mg/kg;

3. Other multiple dose toxicity: Rat oral TDLo: 13mg/kg/13W-I; Rat oral TDLo: 2618mg/kg/20D-I; mouse oral TDLo: 10500mg/kg/16D-I; mouse oral TDLo: 19500mg/kg/13W-I;

4 , Chronic toxicity/carcinogenicity

Rat subcutaneous TDLo: 2600mg/kg/65W-I;

5. Reproductive toxicity

Mouse intraperitoneal TDLo : 79mg/kg (8-10 days after conception in female rats);

6. Mutagenicity

Escherichia coli gene mutation test: 2mg/L;

Ecological data

None

Molecular structure data

1. Molar refractive index: 20.31

2. Molar volume (cm3/mol): 72.7

3. Isotonic specific volume (90.2K ): 191.2

4. Surface tension (dyne/cm): 47.7

5. Polarizability (10-24cm3): 8.05

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): -0.5

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 3

4. Number of rotatable chemical bonds: 0

5. Number of tautomers: 3

6. Topological molecule polar surface area 43.4

7. Number of heavy atoms: 7

8. Surface charge: 0

9. Complexity: 102

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. This product has low toxicity. When handling hot succinic acid or anhydride during production, activated carbon gas masks and gloves should be worn to prevent irritation of mucous membranes and skin burns.

2. Exist in oriental tobacco leaves and smoke.
 

Storage method

1. Store sealed in a cool and ventilated place.

2. Packed in plastic bags lined with plastic bags and woven bags coated. Net weight 25kg. Store and transport according to general chemical regulations.

Synthesis method

3. Tobacco: OR, 18.

4. Obtain orthorhombic prisms from absolute ethanol.

Purpose

The pharmaceutical industry is used to manufacture analgesics, diuretics, analgesics, antipyretics and anti-inflammatory, contraceptive, anti-cancer and other drugs. The dye industry is small and can be used as raw material for synthetic dyes after hydrolysis. The synthetic resin industry is used to manufacture alkyd resins and ion exchange resins. The plastics industry uses it to make fiberglass reinforced plastics. The pesticide industry is used to create plant growth regulators and more. In the organic industry, it is used as an intermediate for the synthesis of organic compounds. Used as alkali titration standard in analytical chemistry. ​

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/16897

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search