Thiophenol

Thiophenol structural formula

Structural formula

Business number 02YD
Molecular formula C6H6S
Molecular weight 110.18
label

phenylthiol,

Benzene(yl)mercaptan,

thiophenol,

thiophenol,

mercaptobenzene,

Thiophenol (0311 restricted for export),

Mercaptophenol,

Mercaptobenzene,

Fema 3616,

Benzenethiol,

Akos Bbs-00004420,

Benzenethiolnylchloride,

Mercapto-benzen,

Phenol, thio-,

Phenylthiol,

aromatic sulfur compounds

Numbering system

CAS number:108-98-5

MDL number:MFCD00004826

EINECS number:203-635-3

RTECS number:DC0525000

BRN number:506523

PubChem number:24901811

Physical property data

1. Properties: Colorless liquid with a suffocating odor. [1]

2. Melting point (℃): -14.8[2]

3. Boiling point (℃): 168.3[3]

4. Relative density (water = 1): 1.0728[4]

5. Relative vapor Density (air=1): 3.8[5]

6. Saturated vapor pressure (kPa): 0.186 (20℃)[6]

7. Critical pressure (MPa): 4.74[7]

8. Octanol/water partition coefficient: 2.52[8]

9. Flash point (℃): 51[9]

10. Explosion limit (%): No data yet

11. Lower explosion limit (%): 1.2[10]

12. Solubility: insoluble in water, miscible in ethanol, ether, benzene, and carbon disulfide. [11]

Toxicological data

1. Acute toxicity[12]

LD50: 46.2mg/kg (rat oral); 267mg/kg (mouse Oral); 300mg/kg (rat transdermal); 134mg/kg (rabbit transdermal)

LC50: 149mg/m3; 33ppm (rat inhalation, 4h )

2. Irritation No information available

Ecological data

1. Ecotoxicity[13]

LC100: 5mg/L (5h) (bluegill sunfish); 5mg/L ( 23h) (goldfish)

2. Biodegradability [14] Activated sludge method, 6d, BOD removal rate 30%~42% .

3. Non-biodegradability[15] In the air, when the hydroxyl radical concentration is 5.00×105 pieces/cm3, the degradation half-life is 34 hours (theoretical).

4. Bioaccumulation[16] BCF is 17 (theoretical).

Molecular structure data

1. Molar refractive index: 34.42

2. Molar volume (cm3/mol): 102.0

3. Isotonic specific volume (90.2K ): 255.7

4. Surface tension (dyne/cm): 39.4

5. Polarizability (10-24cm3): 13.64

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 0

5. Number of tautomers: 2

6. Topological molecule polar surface area 1

7. Number of heavy atoms: 7

8. Surface charge: 0

9. Complexity: 46.1

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Toxic, flammable and corrosive. It has a strong irritating effect on the eyes, mucous membranes, respiratory tract and skin. Inhalation can cause larynx and bronchospasm, edema, chemical pneumonia, and pulmonary edema, resulting in death. LD5046.2mg/kg (rat oral). Production should be strictly enclosed, provide adequate local exhaust, and be as mechanized and automated as possible. Gas masks should be worn when contact with steam is possible, and operators should wear protective equipment.

2. Stability[17] Stable

3. Incompatible substances[18] Strong oxidizing agent, strong alkali

4. Polymerization hazard[19] No polymerization

Storage method

Storage Precautions[20] Storage in a cool, well-ventilated special warehouse, and implement the “two people to receive and receive, two people to keep” system. Keep away from fire and heat sources. Keep container tightly sealed. They should be stored separately from oxidants, alkalis, and food chemicals, and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

Thiophenol can be obtained by reducing benzenesulfonic acid or benzenesulfonyl chloride with sulfuric acid and zinc, or by electrolytic reduction. Another preparation method uses chlorobenzene as raw material and reacts with hydrogen sulfide. Mix chlorobenzene and hydrogen sulfide at a molar ratio of 1:2 and react at 580-600°C. The conversion rate is more than 30%, and the yield of thiophenol is more than 70%.

Purpose

1. Used as an intermediate for fine chemicals such as dyes, medicines, pesticides, polymerization inhibitors, antioxidants, etc., for example, used in the production of drugs thiamphenicol, fungicides, Kewen powder, etc.

2. Change the alkene from Z to E. Its sodium salt is weaker in alkalinity than sodium methoxide or sodium ethoxide, has strong nucleophilicity, and can selectively remove the methyl or benzyl groups of the quaternary iron salt.

3. Used in organic synthesis, pharmaceutical industry and as analytical reagents. [21]

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/17234

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search