sec-butylbenzene

Sec-butylbenzene structural formula

Structural formula

Business number 03QN
Molecular formula C10H14
Molecular weight 134.22
label

Other butylbenzene,

(1-Methylpropyl)benzene,

2-phenylbutane,

Second butylbenzene,

sec-butylbenzene,

2-Phenylbutane,

(1-Methylpropyl)benzene,

plasticizer,

Surfactant,

solvent for aromatic hydrocarbons

Numbering system

CAS number:135-98-8

MDL number:MFCD00009329

EINECS number:205-227-0

RTECS number:CY9100000

BRN number:1903902

PubChem number:24851741

Physical property data

1. Properties: colorless and transparent liquid[1]

2. Melting point (℃): -82.7[2]

3. Boiling point (℃): 173.5[3]

4. Relative density (water=1): 0.86[4]

5. Relative vapor density (air=1): 4.62[5]

6. Saturated vapor pressure (kPa): 0.13 (18.6℃) [6]

7. Critical temperature (℃): 377[7]

8. Critical pressure (MPa) : 3.14[8]

9. Octanol/water partition coefficient: 4.57[9]

10. Flash point (℃): 45[10]

11. Ignition temperature (℃): 415[11]

12 . Explosion upper limit (%): 6.9[12]

13. Explosion lower limit (%): 0.8[13]

14. Solubility: Insoluble in water, soluble in most organic solvents such as ethanol, ether, and benzene. [14]

15. Refractive index (20ºC): 1.49020

16. Refractive index (25ºC): 1.48779

17 . Viscosity (mPa·s, 20ºC): 28.53

18. Viscosity (mPa·s, 30ºC): 27.53

19. Heat of evaporation (KJ/mol, 25ºC): – 49.53

20. Heat of evaporation (KJ/mol, b.p.): -37.97

21. Heat of fusion (KJ/mol): -9.84

22. Heat of formation (KJ/mol, 25ºC): 66.5282×103

23. Solubility (%, water, 20ºC): 0.0317

24. Steam Pressure (kPa, 25ºC): 0.23

25. Vapor pressure (kPa, 76.26ºC): 4.00

26. Vapor pressure (kPa, 105.986ºC): 13.33

27. Solubility parameter (J·cm-3)0.5: 17.428

28. van der Waals area (cm 2·mol-1): 1.146×1010

29. van der Waals volume (cm3 sup>·mol-1): 90.190

30. Gas phase standard combustion heat (enthalpy) (kJ·mol-1): -5918.56

31. Gas phase standard claimed heat (enthalpy) (kJ·mol-1): -17.36

32. Liquid phase standard combustion heat (enthalpy) ( kJ·mol-1): -5869.52

33. Liquid phase standard claims heat (enthalpy) (kJ·mol-1): -66.40

34. Liquid phase standard hot melt (J·mol-1·K-1): 251.7

Toxicological data

1. Acute toxicity[15]

LD50: 6300mg/kg (rat oral); >16ml (13760mg)/kg (rabbit transdermal)

2. Irritation[16]

Rabbit transdermal: 100mg (24h), moderate irritation.

Rabbit eye: 500mg (24h), mild irritation.

Ecological data

1. Ecotoxicity No data yet

2. Biodegradability[17] Activated sludge method , the initial concentration is 100mg/L, and the degradation is 56%~67% after 5 days.

3. Non-biodegradability No data yet

4. Bioaccumulation[18] BCF: 660 (theoretical)

5. Other harmful effects[19] This substance may be harmful to the environment and harmful to aquatic organisms and Birds should be given special attention. Attention should also be paid to accumulation in mammals.

Molecular structure data

1. Molar refractive index: 45.07

2. Molar volume (cm3/mol): 156.0

3. Isotonic specific volume (90.2K ): 362.1

4. Surface tension (3.0 dyne/cm): 29.0

5. Polarizability (0.5 10-24cm 3): 17.86

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): 4.2

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 0

4. Number of rotatable chemical bonds: 2

5. Number of tautomers:

6. Topological molecular polar surface area (TPSA): 0

7. Number of heavy atoms: 10

8. Surface charge: 0

9. Complexity: 80

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 2

13. Determine the number of chemical bond stereocenters Number: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Stability[20] Stable

2. Incompatible substances[21] Strong oxidants, acids, halogens, etc.

3. Polymerization hazards[22] No polymerization

Storage method

Storage Precautions[23] Stored in a cool, ventilated warehouse. The storage temperature should not exceed 37°C. Keep away from fire and heat sources. Keep container tightly sealed. should be kept away from oxidizer, do not store together. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

Obtained from the reaction of benzene and sec-butyl chloride. Stir and cool anhydrous benzene and anhydrous aluminum chloride, add sec-butyl chloride dropwise at 0-5°C, and continue stirring for 1 hour after the addition. Cold water was added with stirring, and the reaction mixture was subjected to steam distillation. The distillate is separated from water, dried and then fractionated. The 171-173°C fraction is collected to obtain the finished product with a yield of 77%.

Purpose

Used as solvents, plasticizers, and surfactants for coatings and organic synthesis. [24]

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/17996

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search