Polyether_Polyether Polyol Knowledge N-nitrosodiphenylamine

N-nitrosodiphenylamine

N-nitrosodiphenylamine structural formula

Structural formula

Business number 01WK
Molecular formula C12H10N2O
Molecular weight 198.22
label

diphenylnitrosamine,

N-nitroso-N-phenylaniline,

Highly efficient polymerization inhibitor N-NO,

Anti-scorch agent NA,

Diphenyl nitrosamine,

N-nitroso-N-phenyl aniline,

Polymerization inhibitor

Numbering system

CAS number:86-30-6

MDL number:MFCD00019920

EINECS number:201-663-0

RTECS number:JJ9800000

BRN number:909531

PubChem number:24886620

Physical property data

1. Properties: yellow to brown powder or flake crystal

2. Density (g/cm3): 1.24

3. Relative Vapor density (g/mL, air=1): Undetermined

4. Melting point (ºC): 66.5

5. Boiling point (ºC, normal pressure): 268

6. Boiling point (ºC, 5.2kPa): Undetermined

7. Refractive index: Undetermined

8. Flash point (ºC): Undetermined

9. Specific rotation (º): Undetermined

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (kPa, 25ºC): Undetermined

12. Saturated vapor pressure (kPa, 60ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Explosion lower limit (%, V/V): Undetermined

19. Solubility: Insoluble in water (0.0035 g/100 mL). Easily soluble in organic solvents such as acetone, hot benzene, hot ethanol, ethyl acetate, methylene chloride, carbon tetrachloride, carbon disulfide, N, N-dimethylformamide and ether.

Toxicological data

1. Toxicity classification Poisoning 2. Acute toxicity Oral administration – rat LD50: 1825 mg/kg; Oral administration – mouse LD50: 1860 mg/kg. 3. Irritation data Eyes – Rabbit 500 mg/24 hours Mild.
4. It is irritating to the skin, glasses and upper respiratory tract. Long-term exposure will cause changes in liver function and blood, and cause symptoms such as neurasthenia. During the production process, attention should be paid to the tightness of the equipment and the ventilation of the workshop, and operators should wear protective equipment. Eating and drinking in the production premises is not allowed.

Ecological data

This product slightly pollutes water bodies.

Molecular structure data

1. Molar refractive index: 60.61

2. Molar volume (cm3/mol): 181.5

3. Isotonic specific volume (90.2K): 467.6

4. Surface tension (dyne/cm): 44.0

5. Polarizability (10-24cm3): 24.02

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 3

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: none

6. Topological molecule polar surface area 32.7

7. Number of heavy atoms: 15

8. Surface charge: 0

9. Complexity: 178

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

Rearrangement reaction can occur in methanol hydrochloric acid solution to form p-nitrosodiphenylamine. This product is easily oxidized. It is an organic drug.

Storage method

Stored in a cool, ventilated warehouse, fireproof, sunproof and airtight.

Synthesis method

1. Obtained from the reaction of diphenylamine and sodium nitrite in the presence of sulfuric acid: the nitrosation reaction uses ethanol or xylene (or chlorobenzene) as the solvent, the sodium nitrite solution content is 40%, and the concentrated sulfuric acid content is 30% , react at about 26℃ for 2.5-3h. The reaction product is washed with water until the pH value is 6-7. When ethanol is used as the solvent, a solid product is obtained after drying; when xylene or chlorobenzene is used as the solvent, a liquid product is obtained, and the product needs to be dried with calcium chloride.

2. Anhydrous aniline Aluminum chloride is used as a catalyst to carry out the condensation reaction. The reaction product is precipitated with hydrochloric acid, neutralized with sodium hydroxide, boiled, washed, vacuum distilled, crystallized with ethanol, and separated to obtain the finished product.

Purpose

1. In the rubber processing industry, it is used as an anti-scorch agent, vulcanization retardant (vulcanization retardant), and college polymerization inhibitor of chloroprene rubber; it is also used as an insecticide and disinfectant; it is also used as an anti-aging agent. Agent 4010 and intermediates of dyes.

2. Used as natural rubber, synthetic Anti-scorch agent for rubber (except butyl rubber), which can increase the safety of rubber mixing operations; it can also be used as a re-plasticizer for slightly scorched rubber. It is particularly effective for compounds containing alkaline accelerators such as thiazoles, thiurams and dithiocarbamates, especially for rubber containing thiazole-guanidine and thiazole-thiuram accelerator systems; it is particularly effective for compounds containing aldehydes and amines The accelerator has little effect on the rubber and is not suitable for thiuram sulfur-free vulcanized rubber. It can replace wood tar as an efficient polymerization inhibitor for chloroprene rubber. It is also an important raw material for antioxidant 4010 and dye intermediate RT color base.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/18511

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search