D-erythorbic acid

D-erythorbic acid structural formula

Structural formula

Business number 0213
Molecular formula C6H8O6
Molecular weight 176.12
label

D-2,3,5,6-tetrahydroxy-2-hexenoic acid-γ-lactone,

Isovitamin C,

D-(−)-Isoascorbic acid,

D-erythro-Hex-2-enoic acid γ-lactone,

Antioxidants

Numbering system

CAS number:89-65-6

MDL number:MFCD00005378

EINECS number:201-928-0

RTECS number:KF3015000

BRN number:84271

PubChem number:24881081

Physical property data

1. Properties: white shiny granular crystals.

2. Density (g/mL, 25/4℃): Undetermined

3. Relative vapor density (g/mL, air=1): Undetermined

4. Melting point (ºC): 164~172℃ (decomposition) 5. Boiling point (ºC, normal pressure): Undetermined

6. Boiling point (ºC, 5.2kPa): Undetermined

7 . Refractive index: No determination

8. Flash point (ºC): No determination

9. /p>

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (kPa, 25ºC): Undetermined

12. Saturated vapor Pressure (kPa, 60ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: Easily soluble in water, ethanol and pyridine, can Soluble in acetone, slightly soluble in glycerin, insoluble in ether and benzene.

Toxicological data

None

Ecological data

None

Molecular structure data

1. Molar refractive index: 35.26

2. Molar volume (cm3/mol): 90.1

3. Isotonic specific volume (90.2K ): 310.3

4. Surface tension (dyne/cm): 140.5

5. Polarizability (10-24cm3): 13.97

Compute chemical data

1.  Hydrophobic parameter calculation reference value (XlogP): -1.8

2. Number of hydrogen bond donors: 4

3. Number of hydrogen bond acceptors: 6

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: 8

6. Topological molecular polar surface area (TPSA): 107

7. Number of heavy atoms: 12

8. Surface charge: 0

9. Complexity: 232

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 2

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters : 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. It is quite stable in the air, but deteriorates rapidly in the presence of air in the solution.

2.This product has better antioxidant properties than ascorbic acid, but poorer heat resistance. It has strong reducing properties and will slowly change color and decompose when exposed to light. Heavy metal ions will promote its decomposition.

Storage method

1. Packed in double-layered food paper or polyethylene plastic bags, with silica gel desiccant in the interlayer, and packed in hard cardboard boxes or barrels.

2. It is strictly prohibited to mix storage with toxic, harmful or other pollutants and oxidizing substances. Store in a dry place, protected from moisture and heat.

Synthesis method

1. It is made from corn starch as raw material and fermented into gluconic acid. The process used by Japan’s Fujisawa Pharmaceutical Company is: glucose is produced from corn starch, then Methly2-ketogluconate is produced, treated with sodium methoxide to obtain sodium erythorbate, and then passed through an ion exchange resin Desalting, erythorbic acid is produced.

2. Two-step method: first biosynthesize 2-keto-D-gluconic acid, and then chemically synthesize D-isoascorbic acid. It can oxidize glucose to produce 2-keto- Staphylococcus aureus, Sescherichia marcescens, Erwinia, etc. After the fermentation is completed, the fermentation broth is neutralized with calcium carbonate, and then classified, separated and extracted. 2-Keto 2-D gluconic acid can be obtained from fermentation broth through free acid extraction or calcium salt extraction.

(1) Free acid extraction

(2) Calcium salt extraction

(3) Synthesis of D-erythorbic acid

3.Using fermentation method. Glucose is fermented by aerobic fermentation (28°C, 50h) by Pseudomonas fluorescence to obtain α-ketogluconate calcium, which is then used to form methyl ester using methanol and sulfuric acid. It is obtained by adding methanol sodium hydroxide solution for enolization reaction.

Purpose

1.D-Erythorbic acid is mainly used in the food industry and pharmaceutical industry. As a food antioxidant, preservative and color development aid, it is widely used in meat products, fish products, beer, fruit juices, fruits, canned vegetables and oils. In practical applications, its sodium salt is almost always used.

2.Mainly used as antioxidants, preservatives, and color development aids. The general dosage (mass fraction) is 0.1% to 0.5%.

3.Isoascorbic acid is mainly used as boiler water, circulating cooling water and other industrial water in the field of water treatment. Deoxidizer.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/19056

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search