1-Naphthol

1-naphthol structural formula

Structural formula

Business number 0220
Molecular formula C10H8O
Molecular weight 144
label

alpha-naphthol,

1-Hydroxynaphthalene,

α-Naphthol,

1-Hydroxynaphthalene,

1-Naphthol

Numbering system

CAS number:90-15-3

MDL number:MFCD00003930

EINECS number:201-969-4

RTECS number:QL2800000

BRN number:1817321

PubChem number:24897451

Physical property data

1. Properties: colorless or yellow, with phenol smell, crystal or powder, turns rose color when exposed to light.

2. Relative density (d994) : 1.0989

3. Relative vapor density (g/mL, air =1): Undetermined

4. Melting point (ºC): 96

5. Boiling point (ºC, normal pressure): 278~280

6. Standard heat of combustion (enthalpy) of the crystal phase (kJ·mol-1): -4957.4

7. Refractive index(n99 D): 1.6224

8. Gas phase standard combustion heat (enthalpy) (kJ·mol-1): -5048.6 p>

9. The gas phase standard claims heat (enthalpy) (kJ·mol-1): -29.9

10. The crystal phase standard claims heat (enthalpy) (kJ ·mol-1): -121.0

11. Vapor pressure (kPa, 94ºC): 0.13kPa

12. Saturated vapor pressure (kPa, 60ºC ): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical Pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) distribution coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: Slightly soluble in water, easily soluble in benzene, ethanol, ether, and chloroform and alkaline solutions, etc.

20. Flash point (ºC): 125

Toxicological data

Toxic, rat oral LD50: 2590mg/kg.

Ecological data

None

Molecular structure data

1. Molar refractive index 45.97

2. Molar volume (cm3/mol): 121.9

3. Isotonic specific volume (90.2K) : 326.1

4. Surface tension (dyne/cm): 51.0

5. Polarizability (10-24cm3): 18.22

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 0

5. Number of tautomers: 2

6. Topological molecule polar surface area 20.2

7. Number of heavy atoms: 11

8. Surface charge: 0

9. Complexity: 133

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. TotalNumber of price key units: 1

Properties and stability

1. Exist in smoke.

2. Can sublimate and evaporate with steam.

3. Swallowing or absorption through the skin can cause poisoning. It is irritating to the eyes and mucous membranes and can cause rashes at the contact parts of the human body. The symptoms are vomiting, diarrhea, abdominal pain, anemia, collapse, and protein precipitation. Production equipment must be sealed to prevent leakage, and any spills on the skin must be washed immediately. The workshop should be ventilated and operators should wear protective equipment.

Storage method

This product should be stored in a sealed, cool, dry place.

Synthesis method

1. There are many production methods for 1-naphthol, which can be divided into: α-naphthalene sulfonic acid alkali fusion method, α-naphthylamine hydrolysis method, and tetralin method. 1. α-naphthylamine hydrolysis method: α-naphthylamine is hydrolyzed using dilute sulfuric acid as a medium to obtain α-naphthol crude product. The crude product is separated, neutralized, and distilled to obtain the finished product. 2. In the sulfonation method, refined naphthalene is sulfonated with sulfuric acid at low temperature to obtain α-naphthalene sulfonic acid, and β-naphthalene sulfonic acid is produced as a by-product. After the by-product is separated, it is neutralized, alkali fused, acidified, and then separated and distilled to obtain the finished product. . Raw material consumption quota: sulfuric acid (98%) 900kg/t, refined naphthalene (99.5%) 1150kg/t, caustic soda (42%) 1300kg/t.

2. The aqueous solution reacts with ferric chloride to form purple precipitate.

3. It is prepared from 1-naphthalenesulfonic acid through alkaline solution.

Purpose

1. The demand for 1-naphthol is only about 5% of that of 2-naphthol. However, 1-naphthol, as a raw material for the pesticide carbaryl, is in great demand. Intermediates derived from 1-naphthol include N-phenyl-1-naphthylamine, N-ethyl-1-naphthylamine, N-cyclohexyl-1-naphthylamine, and 1-hydroxy-2-naphthylcarboxylic acid. , 1-naphthol-2-sulfonic acid, 1-naphthol-4-sulfonic acid, 1,7-Klebsenic acid, acetamido-7-naphthol, 2,4-dinitronaphthol, etc. In the dye industry, land is used to produce acid yellow 1, acid orange 20, mordant black 3, mordant black 11, solvent red 3, solvent orange 5, oil palm GB, etc. In the pharmaceutical industry, it can be used to manufacture preservatives and anti-mild rheumatism drugs. It is also an effective antioxidant for many aldehydes, mineral oils and vegetable oils, and is widely used in synthetic fragrances, rubber antioxidants and color couplers of film films.

2. It is the basic raw material for organic synthesis industry, pharmaceutical industry and dye industry. It is also used in the production of plastics, rubber antioxidants, color film couplers, etc. It is a restricted substance in cosmetic components. The maximum allowable content is 0.5%. The allowable use range is coupling hair dye for hair dyeing.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/19181

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search