Polyether_Polyether Polyol Knowledge 2,3-dimethyl-1,3-butadiene

2,3-dimethyl-1,3-butadiene

2,3-dimethyl-1,3-butadiene structural formula

Structural formula

Business number 05AZ
Molecular formula C6H10
Molecular weight 82.15
label

CH2=C(CH3)C(CH3)=CH2

Numbering system

CAS number:513-81-5

MDL number:MFCD00008595

EINECS number:208-172-0

RTECS number:None

BRN number:605285

PubChem number:24864689

Physical property data

1. Properties: colorless liquid

2. Density (g/ cm3, 25/4℃): 0.727

3. Liquid Phase standard heat of combustion (enthalpy) (kJ·mol-1): -3804.35

4. Melting point (ºC): -76

5. Boiling point (ºC, normal pressure): 68-69

6. Liquid phase standard claims heat (enthalpy) (kJ·mol-1): 14.14

7. Refractive index: 1.438

8. Flash point (ºF): -8

9. Liquid phase standard hot melt (J·mol-1 ·K-1): 180.1

10. Gas phase standard combustion heat (enthalpy) (kJ·mol-1): -3835.31

11. Gas phase standard claimed heat (enthalpy) (kJ·mol-1): 45.10

12. Gas phase standard entropy (J·mol-1 ·K-1): 340.41

13. Gas phase standard free energy of formation (kJ·mol-1): 148.7 p>

14. Gas phase standard hot melt (J·mol-1·K-1): 126.5

15. Critical pressure ( KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: soluble in water

Toxicological data

None yet

Ecological data

This substance may be harmful to the environment, and special attention should be paid to water bodies.

Molecular structure data

1. Molar refractive index: 28.98

2. Molar volume (cm3/mol): 117.3

3. Isotonic specific volume (90.2K ): 241.2

4. Surface tension (dyne/cm): 17.8

5. Dielectric constant (F/m): 2.13

6. Extreme Chemical rate (10-24cm3): 11.48

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): 3.1

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 0

4. Number of rotatable chemical bonds: 1

5. Number of tautomers: none

6. Topological molecule polar surface area 0

7. Number of heavy atoms: 6

8. Surface charge: 0

9. Complexity: 66

10. Number of isotope atoms: 0

11. ConfirmNumber of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determined number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

Use and store according to specifications, no decomposition will occur, and avoid contact with oxides

Storage method

Stored in a cool, dry and well-ventilated warehouse. Keep away from fire and heat sources. Protect from direct sunlight. The packaging is sealed. They should be stored separately from acids and food chemicals, and avoid mixed storage. Suitable materials should be available in the storage area to contain spills.

Synthesis method

1. Obtained from pinacol (tetramethylethylene glycol) catalyzed by hydrobromic acid dehydration. Slowly heat pinacol and 48% hydrobromic acid, and collect the distillate until it reaches 95°C. Take the supernatant liquid and wash it with water containing a small amount of hydroquinone, dry it with anhydrous calcium chloride, and then fractionate it to obtain the finished product.

2. Preparation method:

  Add 177g (1.5mol) of dry pinacol (2), 5mL azeotropic hydrobromic acid (47% ~ 48%), and a few grains of zeolite into the reaction bottle. Install a higher-efficiency fractionating column, and install a condenser and receiving device on the fractionating column. Heat the reaction bottle in an oil bath and control the elution speed to about 20 to 30 drops per minute. Slowly collect the distillate until the temperature at the top of the fractionation column reaches 95°C, which takes about 1 hour. Separate the upper layer of the distillate species and wash it twice with water. Add 0.25g of phenol as a polymerization inhibitor, and dry with anhydrous calcium chloride overnight. Fractionate, collect the fractions between 69 and 70.5°C , and obtain 70g of 2,3-dimethyl-1,3-butadiene (1), yield 57 %. Note: ① During distillation , the final fraction at 105-106°C is collected, which is pinacolone, about 35g. ② The product is easy to polymerize, so about 0.3% phenol should be added as a polymerization inhibitor, and it should be sealed and stored at low temperature. [1]

Purpose

Used in the manufacture of synthetic rubber and polymers.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/20423

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search