Polyether_Polyether Polyol Knowledge 2-Chloro-1,3-dinitrobenzene

2-Chloro-1,3-dinitrobenzene

2-chloro-1,3-dinitrobenzene structural formula

Structural formula

Business number 0693
Molecular formula C6H3ClN2O4
Molecular weight 202.55
label

2,6-dinitrochlorobenzene,

2,6-Dinitrochlorobenzene,

Analytical reagents

Numbering system

CAS number:606-21-3

MDL number:None

EINECS number:210-107-6

RTECS number:CZ0525500

BRN number:None

PubChem ID:None

Physical property data

1. Properties: Yellow needle-like crystals.

2. Density (g/mL, 16/4℃): 1.6867

3. Melting point (℃): 88

4. Boiling point (ºC): 315

p>

5. Solubility: soluble in ethanol and ether, insoluble in water.

Toxicological data

None

Ecological data

Other harmful effects: This substance may be harmful to the environment, and special attention should be paid to water bodies.

Molecular structure data

1. Molar refractive index: 44.23

2. Molar volume (cm3/mol): 125.0

3. Isotonic specific volume (90.2K): 354.1

4. Surface tension (dyne/cm): 64.2

5. Polarizability (10-24cm3): 17.53

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: None

3. Number of hydrogen bond acceptors: None

4. Number of rotatable chemical bonds: None

5. Number of tautomers: None

6. Topological molecular polar surface area None

7. Number of heavy atoms: None

8. Surface charge: None

9. Complexity: None

10. Number of isotope atoms: None

p>

11. Determine the number of atomic stereocenters: None

12. Uncertain number of atomic stereocenters: None

13. Determine the number of chemical bond stereocenters: None

14. Number of uncertain chemical bond stereocenters: None

15. Number of covalent bond units: None

Properties and stability

The product may not decompose under normal temperature and pressure.

Toxic. It has a significant irritating effect on the skin and mucous membranes, can cause severe dermatitis and blood poisoning, and damage the liver, kidneys and nervous system, leading to neuralgia, neuritis and neuromyositis. The maximum allowable concentration in the air is 1mg/m3. Operators should wear protective equipment, and clothes should be washed promptly after contamination.

Storage method

Seal the secret container and store it in a sealed main container in a cool, dry place.

Synthesis method

It is obtained by diazotization and substitution of 2,6-dinitroaniline. Add sodium nitrite to concentrated sulfuric acid, stir, and heat to 70°C. After all is dissolved, cool the solution to 25-30°C. Slowly add the solution prepared by 2,6-dinitroaniline and glacial acetic acid, and control the addition speed to keep the reaction temperature above 40°C. After adding, stir at 40℃half an hour. Then add pre-cooled concentrated hydrochloric acid solution of cuprous chloride, the reaction is exothermic and bubbles are generated. When the reaction becomes gentle, heat to 80°C and stop bubbling after 20 minutes. Add an equal volume of water, cool, filter, wash with water, dry, and recrystallize with acetic acid to obtain 2,6-dinitrochlorobenzene. The yield is about 70%.

Purpose

Dye intermediates. Used in the preparation of sulfur dyes. Also used as analytical reagents.

Resource:allhdi.com

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/20805

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search