Polyether_Polyether Polyol Knowledge 1,4-Benzenedimethanol

1,4-Benzenedimethanol

1,4-Benzenedimethanol Structural Formula

Structural formula

Business number 05ZZ
Molecular formula C8H10O2
Molecular weight 138.17
label

terephthalol,

p-Phenylenedimethanol,

p-Xylene-α,α’-diol,

p-Xylylene Glycol,

C6H4(CH2OH)2

Numbering system

CAS number:589-29-7

MDL number:MFCD00004665

EINECS number:209-641-2

RTECS number:None

BRN number:2042077

PubChem number:24847533

Physical property data

1. Physical property data

1. Properties: White needle-like crystals.

2. Melting point (℃): 115-116

3. Boiling point (ºC, 133pa): 138-143

Toxicological data

None yet

Ecological data

None yet

Molecular structure data

1. Molar refractive index: 39.15

2. Molar volume (cm3/mol) 117.0

3. Isotonic specific volume (90.2K) : 314.3

4. Surface tension (dyne/cm): 51.9

5. Polarizability (10-24cm3): 15.52

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 2

3. Number of hydrogen bond acceptors: 2

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: none

6. Topological molecule polar surface area 40.5

7. Number of heavy atoms: 10

8. Surface charge: 0

9. Complexity: 73.3

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

None yet

Storage method

None yet

Synthesis method

1. Brief description of the production method

Obtained from the hydrolysis of p-phenylene dimethyl chloride. Add paraphenylene dimethyl chloride, sodium carbonate and water into the reactor, use industrial alcohol as the emulsifier, raise the temperature to below 90°C, stir and react for 3 hours to obtain the finished product. The yield is over 85%.

2. Preparation method:

Add 1L of distilled water, 150g (0.52mol) of crystalline sodium carbonate, and 80g (0.46mol) of terephthalyl chloride (2) into the high-pressure reaction kettle, and heat to 150°C with stirring. When this temperature is reached, open the vent valve of the autoclave every 5 to 10 minutes to discharge the generated carbon dioxide. Keep the pressure in the autoclave at around 0.5MPa and around 150°C. After 3 hours, cool to 80°C, open the valve of the autoclave, pour out the reactants, and use a small amount ofWash the reaction kettle with water. The reaction solution was filtered while hot, then concentrated to about 200 mL and allowed to cool. Excess solid precipitated. Dissolve the solid in 250 mL of hot ethanol, filter out the insoluble inorganic salts, concentrate to about 130 mL, and cool to crystallize. After suction filtration and drying, 45g of terephthalenedimethanol (1) was obtained, mp was 115~117°C, and the yield was 75%. [1]

Purpose

2. Uses

Intermediates for organic synthesis. Used in the production of soluble polyphenylene.

Resource:allhdi.com

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/21000

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search