Polyether_Polyether Polyol Other Polyether Covestro Desmodur N3580 BA(XP 2679) ultra-fast drying PU curing agent HDI base

Covestro Desmodur N3580 BA(XP 2679) ultra-fast drying PU curing agent HDI base

Type

Aliphatic polyisocyanate (HDI Allophanate trimer)

Supply form

CombinedDesmophen® Grade configuration of light-resistant and wear-resistant polyurethane coating system

Purpose

About80% In butyl acetate

Specifications

Features

Value

Measurement units

Method

NCOContent

15.4±0.3

%

M105-ISO11909

Features

Value

Measurement units

Method

Equivalent

about273

Flashpoint

31.5

°C

DINENISO13736

Density@20°C

about1.1

g/ml

DIN51757

*This data is general information and is not part of the product manual.

Solubility/Dilution
Desmodur® N3580 BA can be diluted with esters, ketones, aromatic hydrocarbons, such as ethyl acetate, butyl acetate, propylene glycol methyl ether acetate, methyl isobutyl Ketones, cyclohexanone, toluene, xylene, naphtha and mixtures thereof. Generally has good miscibility with the listed solvents, but the storage stability of the prepared solution must be tested. PU grade solvents should be used (water content less than 0.05%). These solvents should not contain reactive groups such as hydroxyl and amino groups. Aromatic hydrocarbons are not suitable as solvents. Polar and non-polar solutions with <65% non-volatile components are recommended as diluents. Desmodur® eco N7300 should not be diluted below 40% solids by weight. Prolonged storage of solvents with low binder content may cause turbidity and sedimentation.

Compatibility
Desmodur® N3580BA can usually be mixed with: aliphatic isocyanates such as Desmodur® N100, N75, N3200, N3390, N3400, N3600, N3800, XP 2410, Z4470 and some polyacrylates . However, the compatibility of ingredients in a formulation should always be tested.

Features/Applications
Desmodur® N3580 BA is used in combination with suitable Desmophen® products to prepare light-, weather- and scratch-resistant two-component polyurethane coatings. The main areas of application are in automotive OEM and topcoats for plastic coatings.

Save
– Store in original Covestro sealed containers.
– Recommended storage temperature: 0-30 ℃.
– Avoid moisture, heat and foreign matter.

General Information: This product is sensitive to moisture. Storage in a high temperature environment will cause the product to become darker in color and increase in viscosity.

Storage Time
Provided that the product is stored in full compliance with the requirements in the “Storage” clause above and properly handled, the product shall comply with the The specifications or characteristic values ​​stated in the “Specifications or Characteristic Values” clause above (as appropriate). If a product exceeds the above nine-month period, it does not mean that it no longer meets the specifications or the values ​​set in the characteristic values. However, it is recommended that products more than 9 months from the date of shipment be tested before use to confirm whether they still meet the specifications or the values ​​set in the characteristic values. The manufacturer does not make any commitments for products that are more than 9 months from the date of shipment, nor does it assume any responsibility or liability for products that do not meet the specifications or set values ​​in the characteristic values.

quantity. Prolonged storage of solvents with low binder content may cause turbidity and sedimentation.

Compatibility
Desmodur® N3580BA can usually be mixed with: aliphatic isocyanates such as Desmodur® N100, N75, N3200, N3390, N3400, N3600, N3800, XP 2410, Z4470 and some polyacrylates . However, the compatibility of ingredients in a formulation should always be tested.

Features/Applications
Desmodur® N3580 BA is used in combination with suitable Desmophen® products to prepare light-, weather- and scratch-resistant two-component polyurethane coatings. The main areas of application are in automotive OEM and topcoats for plastic coatings.

Save
– Store in original Covestro sealed containers.
– Recommended storage temperature: 0-30 ℃.
– Avoid moisture, heat and foreign matter.

General Information: This product is sensitive to moisture. Storage in a high temperature environment will cause the product to become darker in color and increase in viscosity.

Storage Time
Provided that the product is stored in full compliance with the requirements in the “Storage” clause above and properly handled, the product shall comply with the The specifications or characteristic values ​​stated in the “Specifications or Characteristic Values” clause above (as appropriate). If a product exceeds the above nine-month period, it does not mean that it no longer meets the specifications or the values ​​set in the characteristic values. However, it is recommended that products more than 9 months from the date of shipment be tested before use to confirm whether they still meet the specifications or the values ​​set in the characteristic values. The manufacturer does not make any commitments for products that are more than 9 months from the date of shipment, nor does it assume any responsibility or liability for products that do not meet the specifications or set values ​​in the characteristic values.


Our Company

Since its establishment, the company has adhered to the service tenet of “integrity-based, customer first”, adhered to customer demand as the focus, market-oriented, adhered to technological innovation, management innovation and service innovation, and constantly implemented lean production, refined management, to provide customers with better products and services! The company has its own factory, research and development base, set up a strict scientific quality management system, and constantly committed to technological innovation, product innovation and management innovation, so as to ensure that our products have a certain competitiveness in the same industry. The factory is located in Jining City, Shandong Province, China, covering an area of 500 acres, and the current production capacity of various types of amines is 5,000 to 10,000 tons per year.

Our Advantages

Strict Quality Management
Our company strictly implements ISO9002 quality management standards and has established a complete quality management system to ensure the long-term stability of product quality.

Efficient Service
Our production is efficient and reliable, so we deliver on time and within delivery deadlines. At the same time, our team is always happy to help customers and strive to solve customer problems in a short time.

Competitive Price
We have long-term services in wholesale Polyurethane catalyst and have established long-term and stable cooperative relationships with many retailers and agents to provide our customers with reasonably priced products.

OEM Available
Our employee team has high R&D capabilities, superb design and development capabilities, skilled manufacturing technology, and rich product application experience, and can also meet OEM business needs.throughout the entire industry chain.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/8552

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search