Polyether_Polyether Polyol Other Polyether Japan Tosoh TOSOH (formerly NPU) CORONATE HXT (C-HXT) curing agent

Japan Tosoh TOSOH (formerly NPU) CORONATE HXT (C-HXT) curing agent

Composition
It is a polyisocyanate modified by HDI isocyanate trimer

Form
Solid content is approximately 77%. The solvent is a mixed solvent of butyl acetate and xylene

Purpose
CORONATE HXT is used as a curing agent for two-component coatings. It is a non-yellowing curing agent and has good weather resistance

General traits

Appearance

Light Yellow liquid

NCOcontent (wt% )

15.7 -16.7

Solid content (wt% )

77 76-78 “>)

Viscosity (cP)

65 -85

Color number (Gardner)

< 1

FreeHDI(HDI span>wt%

< 0.5

Flash point (℃)

35

Proportion (23℃)

Approx. 1.082

Solvent ratio

Acetic acid Butyl ester: xylene=1:1

Features
CORONATE HXT is different from the original biurets and urethane adducts. In addition to the excellent physical properties of general non-yellowing hardeners, CORONATE HXT is especially suitable for biurets and urethane adducts. Compared with urea, it has good heat resistance and good compatibility when mixed with polyols or solvents. It is widely used in motorcycle and car parts, car repair, carpentry, etc.

Solubility
CORONATE HXT is soluble in solvents such as ethyl acetate, butyl acetate, toluene, and xylene. However, it cannot be used with solvents such as alcohols containing active hydrogen.

When diluting
CORONATE HXT is diluted to 20% solid content. However, please first conduct a compatibility test with the solvent to be diluted and confirm before use. When CORONATE HXT is diluted to a solid content below 20%, turbidity and precipitation will occur. Please use solvents with a moisture content of 0.1% or less.

Compatibility
CORONATE HXT has excellent compatibility with other CORONATE products and NIPPOLLAN products. It also has excellent compatibility with acrylic polyols, alkyd polyols and special-purpose fluorine-containing polyols. However, please conduct a compatibility test before use.

Application
CORONATE HXT is mixed with acrylic polyols to produce non-yellowing coatings with excellent wear resistance and solvent resistance. It can be used for two-liquid type automotive repair, industrial use and other purposes.
Two-component coatings composed of CORONATE HXT and alkyd polyols are used as industrial and woodworking coatings.
When CORONATE HXT is added with nitrocellulose, alkyd resin or polyethylene resin, it can greatly improve the solvent resistance and other physical properties of the coating.

Precautions for use
● During storage and safekeeping
CORONATE HXT is a reactive isocyanate compound. Care must be taken to avoid direct sunlight, away from moisture, and stored in a closed container. For long-term storage, please keep it in an environment with a temperature of 15~25℃.
● When using and repackaging
Isocyanate is an extremely reactive substance. When reacting with moisture, carbon dioxide gas is produced. When isocyanate is placed in a container mixed with moisture and stored in a sealed container, gas is generated, which increases the pressure inside the container and may cause the container to rupture. When a certain amount is taken from a container, deterioration may occur due to the effect of moisture in the air. Therefore, before sealing again after opening, it must be fully replaced with dry air, and great care must be taken to prevent moisture from being mixed in.
● When diluting
When diluting CORONATE HXT with a solvent, you must not only pay attention to the moisture content in the solvent, but also pay attention to preventing moisture from mixing during the dilution operation. Please perform dilution work in a dry room.

Security
● CORONATE HXT contains solvents and isocyanates, so care must be taken when using it.
● When using, please follow the requirements of the Material Safety Data Sheet (MSDS).
● This product is flammable. Please use it in fire-free areas.
● This product should avoid contact with eyes or skin. Please wear protective glasses, gloves and other protective equipment when using.
● When spraying paint containing this product, to prevent steam and mist from entering your eyes or nose, please wear protective gear such as protective glasses and gas masks.
●The free isocyanate content of this product is less than 1%. It will not increase in height if stored for a long time.

Packaging
200kg iron drum

��Not only should we pay attention to the moisture content in the solvent, we should also pay attention to preventing moisture from mixing during the dilution operation. Please perform dilution work in a dry room.

Security
● CORONATE HXT contains solvents and isocyanates, so care must be taken when using it.
● When using, please follow the requirements of the Material Safety Data Sheet (MSDS).
● This product is flammable. Please use it in fire-free areas.
● This product should avoid contact with eyes or skin. Please wear protective glasses, gloves and other protective equipment when using.
● When spraying paint containing this product, to prevent steam and mist from entering your eyes or nose, please wear protective gear such as protective glasses and gas masks.
●The free isocyanate content of this product is less than 1%. It will not increase in height if stored for a long time.

Packaging
200kg iron drum


Our Company

Since its establishment, the company has adhered to the service tenet of “integrity-based, customer first”, adhered to customer demand as the focus, market-oriented, adhered to technological innovation, management innovation and service innovation, and constantly implemented lean production, refined management, to provide customers with better products and services! The company has its own factory, research and development base, set up a strict scientific quality management system, and constantly committed to technological innovation, product innovation and management innovation, so as to ensure that our products have a certain competitiveness in the same industry. The factory is located in Jining City, Shandong Province, China, covering an area of 500 acres, and the current production capacity of various types of amines is 5,000 to 10,000 tons per year.

Our Advantages

Strict Quality Management
Our company strictly implements ISO9002 quality management standards and has established a complete quality management system to ensure the long-term stability of product quality.

Efficient Service
Our production is efficient and reliable, so we deliver on time and within delivery deadlines. At the same time, our team is always happy to help customers and strive to solve customer problems in a short time.

Competitive Price
We have long-term services in wholesale Polyurethane catalyst and have established long-term and stable cooperative relationships with many retailers and agents to provide our customers with reasonably priced products.

OEM Available
Our employee team has high R&D capabilities, superb design and development capabilities, skilled manufacturing technology, and rich product application experience, and can also meet OEM business needs.throughout the entire industry chain.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/9983

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search