Covestro (formerly Bayer) Desmodur W H12MDI dicyclohexylmethane diisocyanate hydrogenated MDI HMDI 5124-30-1_Polyether

Type	fat Cyclic diisocyanate monomer
Chemical description	Asia Methyl bis (4-cyclohexyl isocyanate) or dicyclohexylmethane diisocyanate or H12MDI
Molecular formula	OCN-C6H10-CH2-C6H10-NCO
Molecular weight	262
Equivalent	131
CASIndex number	5124 —30 —1
Purpose	Use For the preparation of polyisocyanates and polyurethanes

Product Specifications

Characteristics

Security
Because this product is an isocyanate monomer, special care must be taken when handling it.
This product safety information should be read carefully. It contains information on labeling, transportation, storage and product disposal, product safety and ecological impact. At the same time, please also pay attention to the supplementary data of the technical information. In addition, current national regulations governing the handling of polyisocyanates must be observed and followed.
In Germany, the maximum permissible concentration of Desmodur W for occupational exposure (sum of vapor and fumes) is 0.054 mg/m3 (based on 8-hour TWA). Do not exceed this limit, even for short periods of time. Remarks: H (= able to be absorbed through the skin) (TRGS00, October 2000).
In the UK, the maximum allowable concentration for incidental exposure (based on 8-hour TWA) of all isocyanates is 0.02 mg/m3. The maximum allowable concentration for short-term exposure (based on 10 minutes STEL) is 0.07 mg/cubic meter. This data is based on isocyanate content. In other countries, the maximum allowable concentration related to methylene bis-(4-cyclohexyl isocyanate) should be reported to Check with local authorities.
Avoid skin and eye contact with this product or inhalation of its vapor. Also avoid the formation of fumes, for example when cleaning mixing equipment with air flow or opening safety valves on pressurized vessels.
When handling Desmodur W products, protective gloves of different materials must comply with the following requirements:

	Thickness	Penetration time
Butyl rubber-IIR	≥0.5	≥480 min
Fluorinated rubber-FKM	≥0.4	≥480 min
Nitrile rubber-NBR	≥0.35	≥480 min

Safety goggles, protective gloves and overall protective clothing must be worn. Contaminated clothing must be removed and disposed of immediately. When working under poor ventilation conditions, especially when handling a large number of open products, a gas mask must be worn (for a short period of time, a mask that can filter harmful gases can be worn; for a long period of time, when the protection conditions are poor) work, must be equipped with an assisted breathing system that can work independently).
If the odor of Desmodur W is smelled, it means that the maximum allowable air concentration has been exceeded, and the exposed area should be evacuated immediately.

For a long time, you can wear a mask that can filter harmful gases; for a long time, if you work under poor protection conditions, you must be equipped with an auxiliary breathing system that can work independently).
If the odor of Desmodur W is smelled, it means that the maximum allowable air concentration has been exceeded, and the exposed area should be evacuated immediately.

Our Company

Since its establishment, the company has adhered to the service tenet of “integrity-based, customer first”, adhered to customer demand as the focus, market-oriented, adhered to technological innovation, management innovation and service innovation, and constantly implemented lean production, refined management, to provide customers with better products and services! The company has its own factory, research and development base, set up a strict scientific quality management system, and constantly committed to technological innovation, product innovation and management innovation, so as to ensure that our products have a certain competitiveness in the same industry. The factory is located in Jining City, Shandong Province, China, covering an area of 500 acres, and the current production capacity of various types of amines is 5,000 to 10,000 tons per year.

Our Advantages

Strict Quality Management
Our company strictly implements ISO9002 quality management standards and has established a complete quality management system to ensure the long-term stability of product quality.

Efficient Service
Our production is efficient and reliable, so we deliver on time and within delivery deadlines. At the same time, our team is always happy to help customers and strive to solve customer problems in a short time.

Competitive Price
We have long-term services in wholesale Polyurethane catalyst and have established long-term and stable cooperative relationships with many retailers and agents to provide our customers with reasonably priced products.

OEM Available
Our employee team has high R&D capabilities, superb design and development capabilities, skilled manufacturing technology, and rich product application experience, and can also meet OEM business needs.throughout the entire industry chain.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/10048