Polyether_Polyether Polyol Knowledge 2-Chloroacetamide 2-Chloroacetamide

2-Chloroacetamide 2-Chloroacetamide

2-Chloroacetamide Structural Formula

Structural formula

Business number 01P8
Molecular formula C2H4ClNO
Molecular weight 93.51
label

2-Chloroacetamide

Numbering system

CAS number:79-07-2

MDL number:MFCD00008027

EINECS number:201-174-2

RTECS number:AB5075000

BRN number:878191

PubChem number:24892244

Physical property data

1. Character: white crystal

2. Density (g/mL, 25/4℃): Uncertain

3. Relative vapor density (g/mL, air =1): Uncertain

4. Melting point (ºC): 119~120

5. Boiling point (ºC, decomposition): 225

6. Boiling point (ºC, 5.2kPa): Uncertain

7. Refractive index: Uncertain

8. Flash point (ºC): Uncertain

9. Ratio Optical rotation (º): Uncertain

10. Autoignition point or ignition temperature (ºC): Uncertain

11. Vapor pressure (kPa, 25ºC): Uncertain

p>

12. Saturated vapor pressure (kPa, 60ºC): Uncertain

13. Heat of combustion (KJ/mol): Uncertain

14. Critical temperature (ºC ): Uncertain

15. Critical pressure (KPa): Uncertain

16. Log value of oil-water (octanol/water) partition coefficient: Uncertain

17. Explosion upper limit (%, V/V): Uncertain

18. Explosion lower limit (%, V/V): Uncertain

19. Solubility: Energy Soluble in 10 times of water and 10 times of absolute ethanol, very slightly soluble in ether.

Toxicological data

1. Acute toxicity

Rat LD50: 70mg/kg

Mouse caliber LC50: 155mg/kg; mouse intravenous LD50: 180mg/kg

Mouse abdominal cavity LC50: 100mg/kg

Sufficient caliber LD50: 31mg/kg

Rabbit caliber LD50: 122mg/kg

2. Other multiple doses Toxicity data

Rat caliber TDLO: 960mg/kg/30D-I

3. Teratogenicity

E. coli: 2 mmol/L

Ecological data

None yet

Molecular structure data

1. Molar refractive index: 19.72

2. Molar volume (cm3/mol): 73.7

3. Isotonic specific volume (90.2K ): 184.2

4. Surface tension (dyne/cm): 39.0

5. Polarizability (10-24cm3): 7.82

Compute chemical data

1. Hydrophobic parameter calculation reference value (XlogP): -0.5

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 1

p>

4. Number of rotatable chemical bonds: 1

5. Tautomers.Mass: 2

6. Topological molecular polar surface area (TPSA): 43.1

7. Number of heavy atoms: 5

8. Surface charge: 0

9. Complexity: 44.9

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. The number of uncertain atomic stereocenters: 0

13. The number of determined chemical bond stereocenters: 0

14. The number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

This product is irritating and corrosive. Can irritate skin and mucous membranes. The workshop should be well ventilated and the production equipment should be airtight. Operators should wear protective equipment (such as protective goggles, masks, gloves, etc.).
 

Storage method

1. This product should be sealed and stored in a cool, dry place.

2. This product is packed in a plastic bag lined with a wooden box or a cardboard drum. Store in a cool, ventilated, dry place. Sun protection and moisture-proof. Store and transport according to regulations on irritating substances.

Synthesis method

1. Obtained from the reaction of ethyl chloroacetate and ammonia. First, cool the ethyl chloroacetate to below 10°C, slowly add ammonia water (relative density 0.9) while stirring, and white crystals will immediately precipitate. After adding ammonia water, continue stirring for 1 hour, filter out the crystals, and then wash away the ammonium chloride with ammonia water. , filter it as dry as possible to obtain the crude product, and then recrystallize it with ethanol to obtain the finished product.

Purpose

1. Used in organic synthesis, pharmaceutical intermediates and the synthesis of organic compounds such as chloroacetonitrile, sulfonamide-3-methoxypyrazine, and sulfamethylpyrazine.

2.The maximum allowed usage is 0.3%. It is mainly used as a preservative in shampoos and shower gels, and is also used as a preservative in industrial lotions, cutting oils, plastic slabs and coatings.

3. Mainly used in the pharmaceutical industry to synthesize long-acting sulfonamide B and phentolamine. Also widely used in the production of biochemical buffer ADA.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/14012

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search