Polyether_Polyether Polyol Knowledge Sulfanilamide Sulfanilamide

Sulfanilamide Sulfanilamide

Sulfonamide Structural Formula

Structural formula

Business number 01CW
Molecular formula C6H8N2O2S
Molecular weight 172.21
label

p-Aminobenzenesulfonamide,

dapsamide; dapsamide; sulfonamide,

4-Aminobenzene sulfonamide,

p-Anilinesulfonamide,

aromatic sulfur compounds

Numbering system

CAS number:63-74-1

MDL number:MFCD00007939

EINECS number:200-563-4

RTECS number:WO8400000

BRN number:511852

PubChem number:24899829

Physical property data

1. Properties: White granules or powdery crystals, odorless and slightly bitter.

2. Density (g/mL, 25/4℃): 1.08

3. Relative vapor density (g/mL, air=1): Uncertain

4. Melting point (ºC): 165~166

5. Boiling point (ºC, normal pressure): Uncertain

6. Boiling point (ºC, 5.2kPa): Uncertain Confirm

7. Refractive index: Uncertain

8. Flash point (ºC): Uncertain

9. Specific rotation (º): Uncertain

10. Autoignition point or ignition temperature (ºC): Uncertain

11. Vapor pressure (kPa, 25ºC): Uncertain

12. Saturation Vapor pressure (kPa, 60ºC): Uncertain

13. Heat of combustion (KJ/mol): Uncertain

14. Critical temperature (ºC): Uncertain

15. Critical pressure (KPa): Uncertain

16. Log value of oil-water (octanol/water) partition coefficient: Uncertain

17. Explosion upper limit (% , V/V): Uncertain

18. Lower explosion limit (%, V/V): Uncertain

19. Solubility: Slightly soluble in cold water, ethanol, methanol, Ether and acetone are easily soluble in boiling water, glycerin, hydrochloric acid, potassium hydroxide and sodium hydroxide solution, but insoluble in chloroform, ether, benzene and petroleum ether.

Toxicological data

Acute toxicity:

Oral LD50 2000mg/kg(dog)

3130 mg/kg(guinea pig)

3000mg/kg(mus)

3900mg/kg(rat)

1300mg/kg(rbt)

Main irritant effects:

On skin: possible Causes irritation

On eyes: May cause irritation

Sensitization: No known sensitization

Ecological data

General remarks

Water hazard class 1 (German Regulation) (self-assessment via list) The substance is slightly hazardous to waterHarmful.

Do not allow undiluted or large amounts of product to come into contact with groundwater, waterways, or sewage systems

Do not discharge materials into the surrounding environment without government permission.

Molecular structure data

1. Molar refractive index: 42.80

2. Molar volume (cm3/mol): 120.6

3. Isotonic specific volume (90.2K ): 340.9

4. Surface tension (dyne/cm): 63.7

5. Polarizability (10-24cm3): 16.97

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 2

3. Number of hydrogen bond acceptors: 4

4. Number of rotatable chemical bonds: 1

5. Number of tautomers: none

6. Topological molecule polar surface area 94.6

7. Number of heavy atoms: 11

8. Surface charge: 0

9. Complexity: 211

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

Can be used as medicine to inhibit the growth and reproduction of bacteria. Taking large amounts of sulfonamides can lead to death due to an imbalance between absorption and excretion. Dog oral LD50: 2000mg/kg. Taking large amounts of sulfonamides in humans can cause side effects such as loss of appetite, nausea, vomiting, and diarrhea. It can also affect the liver and kidneys. It can also cause tinnitus, dizziness, headaches, and even various mental symptoms until death. Operators should wear protective equipment.
 

Storage method

1. Store in a cool, ventilated, dry place, protected from heat, sun and moisture. Store and transport according to general chemical regulations.
2. Use lined plastic bags and outer sacks, or lined plastic bags, middle layers of kraft paper bags, and outer fiber cloth bags for packaging. Generally 40kg per bag. Store in a cool, ventilated, dry place, protected from heat, sun and moisture. Store and transport according to general chemical regulations.

Synthesis method

1. It is prepared from acetanilide through chlorosulfonation, amination, hydrolysis and neutralization.
Raw material consumption quota: acetanilide (99%) 1032kg/t, chlorosulfonic acid (96%) 4521kg/t, liquid ammonia (99.8%) 535kg/t,

Liquid alkali (30 %) 863kg/t.

Purpose

1. Used for the determination of nitrite. Biochemical research. Organic Synthesis. 2. This product is an important intermediate for sulfa drugs. This product has a strong antibacterial effect against hemolytic streptococci, meningitis, and cocci, but due to poor efficacy and high toxicity, it is rarely used for oral administration. External use as a spray or ointment can prevent and treat wound infections, but it can cause allergic reactions, so It is also rarely used. Now it is used as an intermediate for the synthesis of other sulfonamide drugs. It is also used as a raw material for the synthesis of agricultural “Huangcaoling” abroad. 3.Used as an analytical reagent, such as a reagent for the photometric determination of nitrite and sodium nitrosoferricyanide. Used in biochemical research, organic synthesis and pharmaceutical industry. 4. The main raw materials for synthesizing sulfonamide drugs are not only used to prepare crystalline sulfonamides for external anti-inflammatory use, but also can be used to synthesize other sulfonamide drugs such as sulfamidine, sulfamethoxazine, sulfamethoxine, etc.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/14071

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search