Polyether_Polyether Polyol Knowledge 2-Ethylhexyl Acetate 2-Ethylhexyl Acetate

2-Ethylhexyl Acetate 2-Ethylhexyl Acetate

2-ethylhexyl acetate structural formula

Structural formula

Business number 02MW
Molecular formula C10H20O2
Molecular weight 172.27
label

2-ethylhexyl acetate,

Acetic Acid 2-Ethylhexyl Ester,

Octyl Acetate,

spices,

aliphatic compounds

Numbering system

CAS number:103-09-3

MDL number:MFCD00027249

EINECS number:203-079-1

RTECS number:AH5600000

BRN number:1758321

PubChem number:24902074

Physical property data

1. Properties: colorless liquid with fruity aroma.

2. Relative density (g/mL, 20/20℃): 0.8734

3. Relative vapor density (g/mL, air=1): 6.0

4. Melting point (ºC): -93

5. Boiling point (ºC, normal pressure): 199

6. Relative density (20℃, 4℃): 0.8749

7. Refractive index (n20ºC): 1.4204

8. Flash point (ºC, opening): 87.8

9. Viscosity (mPa·s, 20ºC ): 1.5

10. Refractive index at room temperature (n25): 1.4182

11. Critical pressure (MPa): 2.09

12. Saturated vapor pressure (kPa, 20ºC): 0.053

13. Heat of evaporation (KJ/mol, 25ºC): 48.15

14. Critical temperature (ºC): 368.85

15. Thermal conductivity (W/(m·K), 10~30ºC): 0.4145

16. Specific heat capacity (KJ/(kg·K), constant pressure): 2.09

17. Critical density (g·cm-3): 0.253

18. Critical volume (cm3·mol -1): 681

19. Solubility: Miscible with organic solvents such as alcohols, ethers, and hydrocarbons, 0.03% dissolved in water at 20°C; water in acetic acid- Dissolve 0.55% in 2-ethylhexyl ester.

20. Critical compression factor: 0.267

21. Eccentricity factor: 0.631

22. Liquid phase standard hot melt (J·mol-1 ·K-1): 348.8

Toxicological data

1. Skin/eye irritation: Start irritation test: Rabbit skin contact, 10mg/24H; Start irritation test: Rabbit skin contact, 500mgREACTION SEVERITY, slight reaction; Standard Dresser test: Rabbit eye contact, 500mgREACTION SEVERITY, slight reaction; Standard Dresser Test: Rabbit Eye Contact, 500mgREACTION SEVERITY, mild reaction; 2. Acute toxicity: Rat oral LD50: 3mg/kg; Rat inhalation LC: >1100ppm/6H; Mouse oral LD50: >3200mg/kg; Rabbit skin contact LD: >20mL/kg ; Guinea pig skin contact LD50: >20mL/kg; 3. Low toxicity and can be absorbed through the mouth and respiratory tract. Under normal conditions of use, it will not cause significant physiological damage. Rats exposed to the concentrated vapor of 2-ethylhexyl acetate for 15 minutes will not die.

Ecological data

This substance is slightly hazardous to water.

Molecular structure data

1. Molar refractive index: 50.11

2. Molar volume (cm3/mol): 197.4

3. Isotonic specific volume (90.2K ): 452.1

4. Surface tension (dyne/cm): 27.4

5. Dielectric constant:

6. Dipole moment (10-24cm3):

7. Polarizability: 19.86

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): 3.2

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 2

4. Number of rotatable chemical bonds: 7

5. Number of tautomers: none

6. Topological molecule polar surface area 26.3

7. Number of heavy atoms: 12

8. Surface charge: 0

9. Complexity: 121

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 1

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

Avoid contact with strong oxidants, strong acids, and strong alkalis. It is non-corrosive to metals when dry. Copper containers should not be used because trace amounts of acetic acid generated by hydrolysis are corrosive to copper. It has the general chemical properties of esters and is easily hydrolyzed in the presence of caustic alkali.

Storage method

Store in a cool, ventilated warehouse. Keep away from fire and heat sources. They should be stored separately from oxidants, acids, and alkalis, and avoid mixed storage. Equipped with the appropriate variety and quantity of fire equipment. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

Refining method: Contains impurities such as free acid and alcohol. During refining, wash with sodium bicarbonate or sodium carbonate aqueous solution, dry with anhydrous sodium carbonate or sodium sulfate and then rectify.

Purpose

Used as a solvent for brushing, nitrocellulose spray paint, baking paint, latex paint, etc. Also used in spice manufacturing.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/14617

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search