Polyether_Polyether Polyol Knowledge Isopropyl alcohol Isopropyl alcohol

Isopropyl alcohol Isopropyl alcohol

Isopropyl alcohol structural formula

Structural formula

Business number 01EU
Molecular formula C3H8O
Molecular weight 60.10
label

2-Propanol,

dimethylmethanol,

2-Pronanal,

sec-Propyl alcohol,

Isopropanol,

Aliphatic alcohols, ethers and their derivatives,

Raw materials and intermediates used in ink

Numbering system

CAS number:67-63-0

MDL number:MFCD00011674

EINECS number:200-661-7

RTECS number:NT8050000

BRN number:635639

PubChem number:24896158

Physical property data

1. Properties: Colorless and transparent liquid, smelling like a mixture of ethanol and acetone. [1]

2. Melting point (℃): -88.5[2]

3. Boiling point (℃): 82.5[3]

4. Relative density (water = 1): 0.79[4]

5. Relative vapor Density (air=1): 2.1[5]

6. Saturated vapor pressure (kPa): 4.40 (20℃)[6]

7. Heat of combustion (kJ/mol): -1995.5[7]

8. Critical temperature (℃): 235[8]

9. Critical pressure (MPa): 4.76[9]

10. Octanol/water partition coefficient: 0.05 [10]

11. Flash point (℃): 11 (CC) [11]

12. Ignition temperature (℃) ): 456[12]

13. Explosion upper limit (%): 12.7[13]

14. Explosion lower limit (%): 2.0[14]

15. Solubility: Soluble in most organic solvents such as water, ethanol, ether, benzene, and chloroform. [15]

16. Viscosity (mPa·s, 20ºC): 2.431

17. Heat of evaporation (KJ/mol, b.p.): 40.06

18. Heat of fusion (KJ/kg): 88.26

19. Heat of formation (KJ/mol): 2005.1

20. Specific heat capacity (KJ/(kg ·K), 20ºC, constant pressure): 2.55

21. Conductivity (S/m): 35.1×10-7

22. Heat Conductivity (W/(m·K), 20ºC): 15.49

23. Volume expansion coefficient (K-1, 20ºC): 0.00107

24. Relative density (20℃, 4℃): 0.7855

25. Relative density (25℃, 4℃): 0.7813

26. Refractive index at room temperature (n 25): 1.3752

27. Critical density (g·cm-3): 0.271

28. Critical volume (cm3·mol-1): 222

29. Critical compression factor: 0.250

30. Eccentricity factor: 0.669

31. Lennard-Jones parameter (A): 15.20

32. Lennard-Jones parameter (K): 135.4

33. Solubility parameter (J·cm-3)0.5: 23.575

34. van der Waals area (cm2·mol-1): 6.270×109

35. van der Waals volume (cm3·mol-1 ): 42.160

36. Gas phase standard combustion heat (enthalpy) (kJ·mol-1): 2051.42

37. Gas phase standard claimed heat (enthalpy) )( kJ·mol-1): -272.42

38. Gas phase standard entropy (J·mol-1·K-1 ): 309.20

39. The gas phase standard is generated from�� and anti-fogging agents for transparent plastics, etc. Used as a diluent for adhesives, antifreeze, dehydrating agent, etc.

2. Reagents for the determination of barium, calcium, copper, magnesium, nickel, potassium, sodium, strontium, nitrite, cobalt, etc. Chromatographic standards. As chemical raw materials, it can produce acetone, hydrogen peroxide, methyl isobutyl ketone, diisobutyl ketone, isopropylamine, isopropyl ether, isopropyl alcohol ether, isopropyl chloride, as well as fatty acid isopropyl ester and chlorine Substitute fatty acid isopropyl ester, etc. In fine chemicals, it can be used to produce isopropyl nitrate, isopropyl xanthate, triisopropyl phosphite, aluminum triisopropoxide, medicines and pesticides, etc. As a solvent, it can be used to produce coatings, inks, extractants, aerosols, etc. It can also be used as antifreeze, detergent, additive for blending gasoline, dispersant for pigment production, fixative for printing and dyeing industry, anti-fogging agent for glass and transparent plastic, etc.

3. Used as a defoaming agent for water-based fracturing fluids in oil wells. Air forms an explosive mixture, which can cause combustion and explosion when exposed to open flames or high heat. It can react with oxidants. Its vapor is heavier than air and can spread to a considerable distance from a lower place, causing backfire when encountering a fire source. If exposed to high heat, the internal pressure of the container will increase and there is a risk of cracking and explosion.

4. Isopropyl alcohol is used as a cleaning and degreasing agent. MOS grade is mainly used for discrete devices and medium and large-scale integrated circuits, and BV-III grade is mainly used for very large-scale integrated circuit technology.

5. Used in the electronics industry as a cleaning and degreasing agent.

6. Used as a diluent for adhesives, an extractant for cottonseed oil, and a solvent for nitrocellulose, rubber, paint, shellac, alkaloids, grease, etc. It is also used in antifreeze, dehydrating agents, preservatives, anti-fogging agents, medicines, pesticides, spices, cosmetics and organic synthesis, etc.

7. It is a relatively cheap solvent in industry, has a wide range of uses, can be freely mixed with water, and has stronger solubility for lipophilic substances than ethanol.

8. It is an important chemical product and raw material. Mainly used in pharmaceuticals, cosmetics, plastics, spices, coatings, etc. [29]

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/14623

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search