Polyether_Polyether Polyol Knowledge p-nitrophenylacetic acid p-nitrophenylacetic acid

p-nitrophenylacetic acid p-nitrophenylacetic acid

Structural formula of p-nitrophenylacetic acid

Structural formula

Business number 02PM
Molecular formula C8H7NO4
Molecular weight 181.15
label

p-Nitrophenylacetic acid,

4-Nitrophenylacetic acid,

p-Niphenylacetic acid,

P-Nitrophenylacetic acid,

Nitrophenylacetic acid(4-),

(p-Nitophenyl)aceticacid,

(P-Nitrophenyl)-aceticaci,

2-(P-Nitrophenyl)aceticacid,

4-Nitro-benzeneaceticaci,

4-Nitrophenylessigsαure

Numbering system

CAS number:104-03-0

MDL number:MFCD00007383

EINECS number:203-168-5

RTECS number:AJ1130010

BRN number:1911801

PubChem ID:None

Physical property data

1. Properties: light yellow needle-like crystals

2. Density (g/mL, 20℃): Undetermined

3. Relative vapor density (g/mL, Air=1): Undetermined

4. Melting point (ºC): 153-156

5. Boiling point (ºC, normal pressure): Undetermined

6. Boiling point (ºC, 3mmHg): Not determined

7. Refractive index: Not determined

8. Flash point (ºC): Not determined

9 . Specific rotation (º): Not determined

10. Autoignition point or ignition temperature (ºC): Not determined

11. Vapor pressure (mmHg, 20.2ºC): Not determined Determined

12. Saturated vapor pressure (kPa, ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical Temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

p>

17. Explosion upper limit (%, V/V): Undetermined

18. Explosion lower limit (%, V/V): Undetermined

19. Dissolution Properties: Soluble in hot water, ethanol and benzene, slightly soluble in cold water.

Toxicological data

1. Acute toxicity: rat oral LD: >500mg/kg; mouse peritoneal cavity LD50: 830mg/kg; 2. Mutagenicity: DNA repair test: Bacillus subtilis, 500μg/disc;

Ecological data

This substance is slightly hazardous to water.

Molecular structure data

1. Molar refractive index: 43.91

2. Molar volume (cm3/mol): 128.7

3. etc.�Specific volume (90.2K): 361.1

4. Surface tension (dyne/cm) 61.9

5. Dielectric constant:

6. Dipole Distance (10-24cm3):

7. Polarizability: 17.40

Compute chemical data

1. Hydrophobic parameter calculation reference value (XlogP): 1.4

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 4

4. Number of rotatable chemical bonds: 2

5. Number of tautomers:

6. Topological molecular polar surface area (TPSA): 80.4

7. Number of heavy atoms: 13

8. Surface charge: 0

9. Complexity: 203

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters Number: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

Avoid contact with oxides.

Storage method

Store in a cool, ventilated warehouse. Keep away from fire and heat sources. Keep container tightly sealed. should be kept away from oxidizer, do not store together. Equipped with the appropriate variety and quantity of fire equipment. Suitable materials should be available in the storage area to contain spills.

Synthesis method

1. Obtained from the hydrolysis of p-nitrophenyl acetonitrile. Mix p-nitrobenzene acetonitrile, concentrated sulfuric acid and water, and heat to reflux for 15 minutes. Then pour the reactant into ice water, precipitate the crystals, filter, wash the filter cake with ice water, and then recrystallize with water to obtain p-nitrophenyl acetic acid. The yield is over 92%.

2. Preparation method:

In a reaction bottle equipped with a stirrer and a reflux condenser, add 150 mL of water, and slowly add 150 mL of concentrated sulfuric acid. Then, 50 g (0.3 mol) of p-nitrobenzene acetonitrile (2) was added, and the reaction was heated and refluxed for 0.5 h with stirring. After the reaction is completed, add an equal volume of water, cool and filter the precipitated liquid. Recrystallize with about 1000 mL hot water, decolorize with activated carbon, filter while hot, and cool to crystallize. Filter with suction, wash with water and dry to obtain 53g of light yellow needle crystal p-nitrophenyl acetic acid (1), mp 151~153°C, yield 95%. [1]

Purpose

Used in organic synthesis.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/15186

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search