Polyether_Polyether Polyol Knowledge Triethylene glycol Triethylene glycol

Triethylene glycol Triethylene glycol

Triethylene glycol Triethylene glycol

Structural formula

Business number 035C
Molecular formula C6H14O4
Molecular weight 150.17
label Triethylene glycol (triethylene glycol): diethyl ether glycol, Ethylene glycol bis(β-hydroxyethyl ether), triethylene glycol ether, triethylene glycol, 2,2'-[1,2-Ethanediylbis(oxy)]bisethanol, Triglycol, Ethylene glycol bis-2-hydroxyethyl ether, 2,2'-Ethylenedioxybis(ethanol), air disinfectant, Tobacco anti-desiccant, fiber lubricants, natural gas desiccant, Aromatic hydrocarbon extraction agent, Disinfectants for air conditioning systems, alcohol solvent

Numbering system

CAS number:112-27-6

MDL number:MFCD00002880

EINECS number:203-953-2

RTECS number:YE4550000

BRN number:969357

PubChem number:24890095

Physical property data

1. Properties: Colorless, odorless and hygroscopic viscous liquid.

2. Boiling point (ºC, 101.3kPa): 285

3. Melting point (freezing point) (ºC): -7

4. Relative density (g /mL, 15/4ºC): 1.1274

5. Relative density (g/mL, 20/4ºC): 1.1072

6. Relative vapor density (g/mL, air = 1): 5.2

7. Refractive index (n20D): 1.455

8. Refractive index (20ºC): 1.457815

9. Viscosity (mPa·s, 20ºC): 49.0

10. Viscosity (mPa·s , 60ºC): 8.5

11. Flash point (ºC, closed): 165

12. Flash point (ºC, open): 196

13. Ignition point (ºC): 371

14. Heat of evaporation (KJ/mol, b.p.): 71.452

15. Heat of combustion (KJ/mol): 3563.4

16. Specific heat capacity (KJ/(kg·K), 20ºC, constant pressure): 2.20

17. Conductivity (S/m, 20ºC): 8.4×10-8

18. Vapor pressure (kPa, 25ºC): 0.00018

19. Vapor pressure (kPa, 162ºC): 1.33

20. Vapor pressure (kPa ,198ºC): 6.67

21. Volume expansion coefficient (K-1,55ºC): 0.00071

22. Lower explosion limit (%, V/V ): 0.89

23. Explosion upper limit (%, V/V): 9.20

24. Solubility: miscible with water, alcohol, propanol, benzene, etc. In 100mL triethylene glycol, 40.6g carbon tetrachloride, 20.4g diethyl ether, 17.7g tetrachlorethylene and 33.0g toluene can be dissolved. In addition, triethylene glycol can still dissolve o-dichlorobenzene, phenol, nitrocellulose, cellulose acetate, dextrin, etc., but cannot dissolve petroleum ether, resin, and grease.

25. Relative density (25℃, 4℃): 1.124

26. Refractive index at room temperature (n25): 1.455720

27. Critical temperature (ºC): 506.85

28. Critical pressure (MPa): 3.30

29. Solubility parameter (J· cm-3)0.5: 27.184

30. van der Waals area (cm2·mol- 1): 1.220×1010

31. van der Waals volume (cm3·mol-1): 84.860

32. Gas phase standard combustion heat (enthalpy) (kJ·mol-1): -3636.8

33. Gas phase standard claim Heat (enthalpy) (kJ·mol-1): -725.0

34. Liquid phase standard combustion heat (enthalpy) (kJ·mol-1): -3557.6

35. Liquid phase standard claims heat (enthalpy) (kJ·mol-1): -804.2

36. Liquid phase Standard hot melt (J·mol-1·K-1): 350.0

Toxicological data

1. Acute toxicity: Rat oral LD50: 17000mg/kg; Guinea pig oral LD50: 7.9mL/kg

2. Slightly toxic, no irritation to eyes and skin, long-term exposure Can macerate the skin.

Ecological data

Slightly harmful to water bodies

Molecular structure data

1. Molar refractive index: 36.40

2. Molar volume (cm3/mol): 135.3

3. Isotonic specific volume (90.2K ): 343.6

4. Surface tension (dyne/cm): 41.6

5. Polarizability (10-24cm3): 14.43

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 2

3. Number of hydrogen bond acceptors: 4

4. Number of rotatable chemical bonds: 7

5. Number of tautomers: none

6. Topological molecule polar surface area 58.9

7. Number of heavy atoms: 10

8. Surface charge: 0

9. Complexity: 49.7

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Avoid contact with oxides. Is a flammable substance. Non-corrosive to metals and non-corrosive to most plastics and rubbers. It has the chemical properties of alcohol and ether.

2.This product has low toxicity. The lower explosion limit in air is 3.2%. The maximum allowable concentration in the air is 10mg/m3≈1.5*10-6 (u/u), which is a low-toxic, flammable and explosive organic matter and should be placed in a ventilated, fireproof and rainproof place. During transportation, they should be handled and handled with care, avoid collisions, stay away from sources of fire, and operate in accordance with national regulations on the storage and transportation of hazardous chemicals. If this product leaks or contaminates the human body, flush it with plenty of water. Use clean water, foam, sand, etc. to extinguish the fire.

3. Exists in tobacco leaves and smoke.
 

Storage method

1. Store in a cool, ventilated warehouse. Keep away from fire and heat sources. They should be stored separately from oxidants, acids, etc., and avoid mixed storage. Equipped with the appropriate variety and quantity of fire equipment. The storage area should be equipped with emergency release equipment and suitable containment materials.

2. It is very easy to absorb moisture. It should be sealed in a dry and clean aluminum barrel or a large barrel with an inner wall sprayed with aluminum. It can also be packed in a galvanized sealed iron barrel. It is best to fill it with nitrogen during packaging. Protect. 200kg per barrel. The product should be stored in a dry, ventilated place, protected from moisture, fire, exposure, and away from fire and heat sources.

Synthesis method

1. Ethylene glycol is produced from the hydration of ethylene oxide, and the by-product triethylene glycol accounts for about 0.5%-1%.

Refining method: Generally refined by distillation. To obtain high-purity triethylene glycol, the commercially available product can be dehydrated with anhydrous sodium sulfate and distilled under reduced pressure three times. The middle fraction is collected and recrystallized twice.

Purpose

1. As a solvent, it is used in nitrocellulose, various resins, gums, rocket fuel, plasticizers and diesel additives. It can also be used in gas chromatography and organic synthesis. Triethylene glycol is mainly used as air dehumidifier solvent and aromatic hydrocarbon extraction agent. It is also used in printing inks, softeners, moisturizers and disinfectants in air conditioning systems.

2.Used as an excellent dehydrating agent for natural gas, oil field associated gas and carbon dioxide; an excellent organic solvent; an air disinfectant; polyvinyl chloride, polyvinyl chloride, Triethylene glycol lipid plasticizer for vinyl acetate resin, glass fiber and asbestos pressed boards, etc. It is also used in organic synthesis, such as the production of brake fluids with high boiling points and good low-temperature properties.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/16334

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search