Isooctene Isooctene

isooctene structural formula

Structural formula

Business number 02V6
Molecular formula C8H16
Molecular weight 112.21
label

butylene,

2,4,4-Trimethyl-1-pentene,

diisobutylene,

2,4,4-Trimethyl-1-pentene

Numbering system

CAS number:107-39-1

MDL number:MFCD00008855

EINECS number:203-486-4

RTECS number:SB2717300

BRN number:1098309

PubChem number:24900479

Physical property data

1. Properties: colorless, transparent, volatile liquid [1]

2. Melting point (℃): -105[2]

3. Boiling point (℃): 112~113[3]

4. Relative density (water=1): 0.72 (15.5℃)[4]

5. Saturated vapor pressure (kPa): 3.35 (25℃)[5]

6. Critical pressure (MPa): 2.6[6]

7. Octanol/water partition coefficient: 4.06[7]

8 .Flash point (℃): 3[8]

9. Ignition temperature (℃): 274[9]

10. Explosion upper limit (%): 5.5[10]

11. Explosion lower limit (%): 0.9[11]

12. Solubility: No data yet

13. Gas phase standard combustion heat (enthalpy) (kJ·mol-1): -5324.18

14. Gas phase standard claims heat (enthalpy) (kJ·mol-1): -110.1

15. Solubility parameter (J·cm-3)0.5: 14.522

16. van der Waals area (cm2·mol-1): 1.230×1010

17. van der Waals volume (cm3·mol-1): 85.190 p>

18. Liquid phase standard combustion heat (enthalpy) (kJ·mol-1): -5288.41

19. Liquid phase standard claimed heat (enthalpy) ( kJ·mol-1): -145.9

20. Saturated vapor pressure (kPa, 21ºC): 13.6

21. Liquid phase standard entropy (J ·mol-1·K-1): 309.0

22. Liquid phase standard formation free energy (kJ·mol-1): 87.1

23. Liquid phase standard hot melt (J·mol-1·K-1): 238.5

Toxicological data

1. Acute toxicity No data available

2. Irritation No data available

Ecological data

1. Ecotoxicity No data available

2. Biodegradability No data available

3 .Non-biodegradability No information available

4. Other harmful effects[12] This substance may be harmful to the environment and is harmful to the environment. Bodies of water should be given special attention.

Molecular structure data

1. Molar refractive index: 38.97

2. Molar volume (cm3/mol): 154.0

3. Isotonic specific volume (90.2K ): 328.9

4. Surface tension (dyne/cm): 20.7

5. Polarizability (10-24cm3): 15.45

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): 3.7

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 0

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: none

6. Topological molecule polar surface area 0

7. Number of heavy atoms: 8

8. Surface charge: 0

9. Complexity: 82.7

10. Number of isotope atoms: 0

11. Number of determined atomic stereocenters: 0

12. Number of uncertain atomic stereocenters: 0

13. Determine the number of stereocenters of chemical bonds: 0

14. Uncertain number of stereocenters of chemical bonds: 0

15. Number of covalent bond units: 1

Properties and stability

1. Stability[13] Stable

2. Incompatible substances[14] Strong oxidants, acids, halogenated hydrocarbons, halogens, etc.

3. Conditions to avoid contact[15] Heating

4. Aggregation hazards[16] Aggregation

Storage method

Storage Precautions[17] Usually products contain polymerization inhibitors. Store in a cool, ventilated warehouse. Keep away from fire and heat sources. The storage temperature should not exceed 37°C. The packaging must be sealed and must not come into contact with air. They should be stored separately from oxidants, acids, and peroxides, and avoid mixed storage. It should not be stored in large quantities or for long periods of time. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

It is industrially separated from the carbon four fractions in refineries or ethylene plants. The remaining part after the extraction of butadiene from the carbon four fraction is used as raw material, and diisobutylene is selectively absorbed with sulfuric acid. The sulfuric acid that has absorbed diisobutylene is then heated to separate and generate a polymer mainly composed of diisobutylene. This polymer is used After washing with sodium carbonate solution and refining by distillation, the above industrial product is obtained.

Purpose

1. This product is used as a tackifier for the preparation of synthetic rubber; various surfactants; modifier for phenolic resin and epoxy resin; ultraviolet absorber; polymerization inhibitor; polyvinyl chloride stabilizer; plasticizer It is also used to produce p-octylphenol, isononyl alcohol and other organic synthesis intermediates.

2. Used as solvent. [18]

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/16639

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search