o-Toluic acid

O-toluic acid structural formula

Structural formula

Business number 03AA
Molecular formula C8H8O2
Molecular weight 136
label

2-methylbenzoic acid,

2-Methylbenzoic acid,

o-Methylbenzoic acid,

Pesticide intermediates; aromatic carboxylic acids and their derivatives,

acidic solvent

Numbering system

CAS number:118-90-1

MDL number:MFCD00002477

EINECS number:204-284-9

RTECS number:XU1400000

BRN number:1072103

PubChem ID:None

Physical property data

1. Properties: Prismatic crystals or needle-like crystals are precipitated from water.

2. Density (g/mL, 25℃): 1.062

3. Relative density (25℃, 4℃): 1.062115

4. Melting point (ºC): 103~105

5. Boiling point (ºC, normal pressure): 258.5751

6. Boiling point (ºC, 99.9kPa): 258~259

7. Refractive index (n115D): 1.512

8. Flash point (ºC): 148

9. Refractive index at room temperature (n25): 1.512115

10. Gas phase standard combustion heat (enthalpy) (kJ·mol-1): -3971.29

11. Gas phase standard claimed heat (enthalpy) (kJ ·mol-1): -302.12

12. Crystal phase standard combustion heat (enthalpy) (kJ·mol-1): -3874.59

13. Crystal phase standard claims heat (enthalpy) (kJ·mol-1): -416.52

14. Critical temperature (ºC): Not available Determined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17 . Explosion upper limit (%, V/V): Undetermined

18. Explosion lower limit (%, V/V): Undetermined

19. Solubility: Slightly soluble in water , easily soluble in ethanol and chloroform.

Toxicological data

1. Acute toxicity: Rat oral LD50: 400mg/kg

Rabbit dermal LD50: 750mg/kg

Ecological data

This substance is harmful to the environment and can cause pollution to water bodies and the atmosphere. Organic acids can easily form acid rain during atmospheric chemistry and atmospheric physical changes. Therefore

When the pH value drops below 5, it will cause serious harm to animals and plants, and the reproduction and development of fish will be seriously affected. The metals can be dissolved into the water and poison fish. Acidification of water bodies will also lead to changes in the composition and structure of aquatic life. Acid-resistant algae and fungi will increase, while root plants, bacteria and vertebrates will decrease, and organic matter will decrease.The decomposition rate of �� is reduced. Acidification will seriously lead to the reduction or death of fish species in lakes and rivers.

Molecular structure data

5. Molecular property data:

1. Molar refractive index: 38.00

2. Molar volume (cm3/mol): 118.2

3. Isotonic specific volume (90.2K): 307.0

4. Surface tension (dyne/cm): 45.4

5. Polarizability (10-24cm3): 15.06

Compute chemical data

1. Hydrophobic parameter calculation reference value (XlogP): 2.5

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 2

4. Number of rotatable chemical bonds: 1

5. Number of tautomers:

6. Topological molecular polar surface area (TPSA): 37.3

7. Number of heavy atoms: 10

8. Surface charge: 0

9. Complexity: 131

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters Quantity: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Avoid contact with oxides. Toxicity of this product: oral LD50400mg/kg in rats. Mice were intraperitoneally injected with LD50 420mg/kg. See benzoic acid.

2. Found in burley tobacco leaves.
 

Storage method

Stored sealed in a cool, dry place. Make sure the workspace has good ventilation. Store away from oxidants, fire sources, and heat sources.

Packaging is in plastic woven bags. Store and transport according to general chemical regulations. See benzoic acid.

Synthesis method

1. Obtained from catalytic oxidation of o-xylene. Using o-xylene as raw material and cobalt naphthenate as catalyst, at a temperature of 120°C and a pressure of 0.245MPa, o-xylene continuously enters the oxidation tower for air oxidation, and the oxidation liquid enters the stripping tower for concentration, crystallization, and centrifugation to obtain Finished product. The mother liquor is distilled, o-xylene and part of o-toluic acid are recovered, and then the slag is discharged. The yield is 74%. Each ton of product consumes 1,300kg of o-xylene (95%).

The preparation method is to use o-xylene in the presence of cobalt naphthenate catalyst

in an oxidation tower at a reaction temperature of 120-125°C and a pressure of 196-392kPa. Continuous oxidation with air can produce finished products.

2. Tobacco: BU, 26.

Purpose

It is used as an organic synthesis intermediate for pesticides, fungicides, phosphoramides, spices, vinyl chloride polymerization initiator MBPO, m-cresol, color film developers, etc.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/18610

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search