Polyether_Polyether Polyol Knowledge Chenodeoxycholic acid

Chenodeoxycholic acid

Chenodeoxycholic acid structural formula

Structural formula

Business number 0514
Molecular formula C24H40O4
Molecular weight 392.57
label

Chenodeoxycholic acid,

Chenodeoxycholic acid,

3alpha,7alpha-dihydroxy-5beta-cholanic acid,

3alpha,7alpha-Dihydroxy-5beta-cholanic acid,

Chenodiol,

CDCA,

Lipoids

Numbering system

CAS number:474-25-9

MDL number:MFCD00064142

EINECS number:207-481-8

RTECS number:FZ1980000

BRN number:3219887

PubChem number:24893153

Physical property data

1. Properties: White or light yellow crystalline powder, bitter taste 2. Density (g/m3, 25/4℃): Undetermined

3. Relative steam density (g/cm 3, air=1): Undetermined

4. Melting point (ºC): 141~1425. Boiling point (ºC, normal pressure): Undetermined

6. Boiling point (ºC, 5.2kPa): Not determined

7. Refractive index: Not determined

8. Flash point (ºC): Not determined

9. Specific rotation ( º): 12

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (kPa, 25ºC): Undetermined

12. Saturated vapor pressure (kPa, 60ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Explosion lower limit (%, V/V): Undetermined

19. Solubility: in acetone, ethanol, Easily soluble in chloroform and glacial acetic acid, almost insoluble in water

Toxicological data

None yet

Ecological data

This substance may be harmful to the environment, and special attention should be paid to water bodies.

Molecular structure data

1. Molar refractive index: 109.65

2. Molar volume (cm3/mol): 347.8

3. Isotonic specific volume (90.2K ): 905.9

4. Surface tension (dyne/cm): 46.0

5. Polarizability (10-24cm3): 43.46

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): 4.9

2. Number of hydrogen bond donors: 3

3. Number of hydrogen bond acceptors: 4

4. Number of rotatable chemical bonds: 4

5. Number of tautomers: None

6. Topological molecule polar surface area 77.8

7. Number of heavy atoms: 28

8 .Surface charge: 0

9. Complexity: 605

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 10

12. Uncertain number of atomic stereocenters: 0

13. Determined number of chemical bond stereocenters: 0

14. Uncertain number of chemical bond stereocenters :0

15. Number of covalent bond units: 1

Properties and stability

Use and store according to specifications, no decomposition will occur, and avoid contact with oxides

Storage method

Tightly sealed brown glass bottle. Store at low temperature.

Synthesis method

1. Take fresh or frozen chicken (or duck, goose) bile, add 1/10 of the industrial sodium hydroxide, heat and boil for 20 to 24 hours, and constantly replenish the evaporated water, cool, and then adjust the pH with hydrochloric acid When the value is 2 to 3, black paste appears. After standing for layering, take out the paste and wash it with water until it becomes neutral to obtain total bile acids. Add 2 times the amount of 95% ethanol and 10% activated carbon to the total bile acids, heat and reflux for 2 to 3 hours, and filter while hot. The filtrate is cooled, and then an equal volume of No. 120 gasoline is added for extraction and degreasing three times. The mixture is left to stand and separated into layers. The lower liquid is separated and concentrated under reduced pressure to obtain a paste. Add a large amount of water to the paste to precipitate, and wash the precipitate with water until it is colorless. Then add 2 times the amount of 95% ethanol and 5% sodium hydroxide solution to the precipitate, adjust the pH to 8.5, and heat to reflux for 2 hours. Then add barium chloride at an amount of 150g per liter, heat to reflux for 2 hours, filter while it is hot, and concentrate the filtrate until a crystal film or turbidity appears. Let it cool to separate the crystals, filter with suction, wash with water, and dry under reduced pressure to obtain white goose. Barium oxycholic acid salt crystals. Then dissolve the barium salt in water, add sodium carbonate containing about 12% of the barium salt, heat and stir, filter, discard the barium carbonate precipitate, adjust the filtrate to pH=2~3 with hydrochloric acid, precipitate, filter, and wash the filter cake with water until Neutral and dry, the finished product of chenodeoxycholic acid can be obtained. If necessary, recrystallize with ethyl acetate 1 to 2 times.

There is also a method of extracting calcium chloride salt.

Purpose

1. It can be used as a drug to dissolve gallstones, used to prevent and treat cholesterol gallstones and hyperlipidemia, and also has certain effects on pigmentary stones and mixed stones.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/19769

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search