Ligurong

Liguron structural formula

Structural formula

Business number 048W
Molecular formula C9H10Cl2N2O2
Molecular weight 248
label

Afalon,Aphalon,Cephalon,Lorex,Lorox,Sinuron,

herbicide

Numbering system

CAS number:330-55-2

MDL number:MFCD00055249

EINECS number:200-659-6

RTECS number:YS9100000

BRN number:2128725

PubChem number:24858583

Physical property data

一 , physical property data


Traits :White crystal


Density (g/mL,25/4): Not available


Relative Vapor density (g/mL, air=1)Not available


Melting point (ºC): 93-94


Boiling point (ºC, normal pressure): 180-190


Boiling point (ºC, 5.2kPa): Not available


Refractive index: Not available


Flash Point (ºC): Not available


Optical rotation (º): Not available


Spontaneous combustion Point or ignition temperature (ºC): Not available


Steam Pressure (kPa, 25ºC): Not available


saturated Vapor pressure (kPa, 60ºC): Not available


Burn Heat (KJ/mol):Not available


Critical Temperature (ºC): Not available


Critical Pressure (KPa): Not available


oil and water Log value of the (octanol/water) partition coefficient:Not available


Explosion Upper limit (%, V/V): Not available


Explosion Lower limit (%, V/V): Not available


Dissolve Properties:Soluble in acetone and ethanol

Toxicological data

Two , Toxicological data:


Acute toxicity:LD50: 1500 mg/kg (rat oral); 2400 mg/kg (mouse oral) mouth) .

Ecological data

Three , Ecological data:


1 ,Other harmful effects: The Substances are harmful to the environment, and special attention should be paid to water pollution.

Molecular structure data

1. Molar refractive index:60.41


2. Molar volume (m3/mol):176.5


3. Isotonic specific volume (90.2K): 467.8


4. Surface tension (dyne/cm): 49.3


5, Polarizability10-24cm3): 23.95

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 2

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: 2

6. Topological molecule polar surface area 41.6

7. Number of heavy atoms: 15

8. Surface charge: 0

9. Complexity: 228

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

None

Storage method

None

Synthesis method

By3,4- Dichlorophenyl isocyanate reacts with hydroxylamine sulfate to form3, 4-Dichlorophenyl hydroxyurea, then with sulfuric acid Dimethyl ester reaction produces linuron. 1.3,4-Preparation of dichlorophenyl hydroxyurea Will34 –Dichlorophenyl isocyanate Toluene solution, hydroxylamine sulfate aqueous solution, and sodium hydroxide solution are pumped into each metering tank according to the calculated amount. Add water and hydroxylamine sulfate into the glass-lined reaction pot at the same time, stir and cool, and stir at 20Start adding sodium hydroxide solution dropwise from left to right, about1hAfter dripping, control the temperature at20Left and right, dripping is completepHat7.5- 7.9 (otherwise add sodium hydroxide or hydroxylamine sulfate). Then start adding drops34-Dichlorophenyl isocyanateToluene solution, control the temperature at this time30±2, about1.5hFinish the dripping and continue the reaction at this temperature2h. Let sit2h, and then pump out the toluene clear liquid in the upper layer . Add water to the lower material, stir it, and then centrifuge to obtain a solid wet product3, 4-Dichlorophenyl hydroxyurea . Yield87%. 2.Preparation of Liguron ; mso-ascii-font-family: ‘Times New Roman’; mso-hansi-font-family: ‘Times New Roman'”>Add the above wet hydroxyurea into the glass-lined reaction kettle, and then��Add the calculated amount of dimethyl sulfate and stir20min. Add drops20%Sodium hydroxide solution, temperature Control within20-30, about1.5h has been added. in30Left and right reactions2h, topH7 is the end point of the reaction. If it is acidic, sodium hydroxide can be added appropriately. After the reaction is completed, add water, stir, filter, and dry to obtain Ligurong original powder. Yield90%.

Purpose

Liguron can be used in corn, wheat, cotton, soybeans, sorghum, peanuts, peas, potatoes, upland rice, sunflowers, sugar cane, flax and a variety of vegetables Control single and dicotyledonous weeds and certain perennial weeds in crop fields such as fruit trees and forest nurseries. Oral administration to rats : 10pt; COLOR: #333333; FONT-FAMILY: 宋体; mso-ascii-font-family: ‘Times New Roman’; mso-hansi-font-family: ‘Times New Roman'”>for4000mg/kg.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/20081

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search