Polyether_Polyether Polyol Knowledge p-bromobenzyl bromide

p-bromobenzyl bromide

Structural formula of benzyl bromide

Structural formula

Business number 05ZV
Molecular formula C7H6Br2
Molecular weight 249.93
label

4-Bromobenzyl bromide,

p-bromobenzyl,

4-bromobenzyl,

4-bromobenzyl bromide,

Alpha,4-dibromotoluene,

p-bromobenzyl bromide,

α,4-Dibromotoluene,

BrC6H4CH2Br

Numbering system

CAS number:589-15-1

MDL number:MFCD00000179

EINECS number:209-636-5

RTECS number:None

BRN number:606498

PubChem number:24850089

Physical property data

1. Properties: White needle-like crystals. Has a pleasant aromatic smell. Can evaporate with water vapor. Heating and sublimation.

2. Density (g/mL, 25/4℃): Undetermined

3. Relative vapor density (g/mL, air=1): Undetermined

4. Melting point (ºC): 61

5. Boiling point (ºC, normal pressure): Undetermined

6. Boiling point (ºC, 1.60kPa): 115~ 124

7. Refractive index: Undetermined

8. Flash point (ºC): Undetermined

9. Specific rotation (º): Undetermined

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (kPa, 25ºC): Undetermined

12. Saturation Vapor pressure (kPa, 60ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (% , V/V): Undetermined

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: Easily soluble in ethanol, ether, carbon disulfide, Benzene and glacial acetic acid. Soluble in water and ethanol.

Toxicological data

None

Ecological data

None

Molecular structure data

None

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 0

4. Number of rotatable chemical bonds: 1

5. Number of tautomers: none

6. Topological molecule polar surface area 0

7. Number of heavy atoms: 9

8. Surface charge: 0

9. Complexity: 75

10. Number of isotope atoms: 0

11. Determine the originalThe number of substereocenters: 0

12. The number of uncertain atomic stereocenters: 0

13. The number of determined chemical bond stereocenters: 0

14 .The number of uncertain chemical bond stereocenters: 0

15. The number of covalent bond units: 1

Properties and stability

1. Basic properties

Can evaporate with water vapor. Sublimation occurs when heated. Has an aromatic smell.

Storage method

None

Synthesis method

1. Add 1.4kg (8.3mol) p-bromotoluene and 10mL PCl3 to the flask and heat to 120℃ with stirring. Control the 115~125℃ and slowly add 1280g for about 3h. (430,8mol) bromonaphthalene, after adding, continue to keep stirring for 0.5h, let it stand and cool to below 10℃, the crystallization will be complete in 4~5h, pour off the uncrystallized part, melt the crystal, leave it at 20℃ overnight, and pour it off again The uncrystallized part was obtained, 0.94kg was distilled under reduced pressure, and the 120~124℃ (1.3~1.6kPa) fraction was collected to obtain 900g with a white appearance. The yield is about 45%. Dissolve 900g of the above steamed product in 700mL methanol, cool to room temperature (20°C) with stirring, filter out, rinse once with a little ice-cold methanol, and air-dry to obtain 810g solid with a purity of 99.2% (GC).
2. Preparation method:

Pre-installed thermometer, reflux condenser (with calcium chloride on top In the reaction bottle of the drying tube (the drying tube is connected to the hydrogen bromide absorption device) and the dropping funnel, add 140g (0.83mol) of p-bromotoluene (2) and 3mL of PCl, heat to about 120°C with stirring, and slowly add bromine dropwise. 128g (0.8mol), control the temperature of the reaction solution between 115 and 125°C, and complete the addition in about 3 hours. After the addition was completed, the reaction was continued to stir for 0.5 h. Let cool to below 10°C and leave overnight. Decant off the uncrystallized liquid. Melt the crystals, place at 20°C overnight, and then pour off the uncrystallized liquid. Distill under reduced pressure and collect the fraction at 120~125℃/1.3kPa to obtain 89g of p-bromobenzyl bromide (1), with a yield of 45%. [1]

Purpose

Determination of aromatic carboxylic acids. Also used in other organic synthesis.

Resource:allhdi.com

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/20826

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search