Chlorophyll b

Chlorophyll b structural formula

Structural formula

Business number 05CG
Molecular formula C55H70MgN4O6
Molecular weight 907.47
label

None yet

Numbering system

CAS number:519-62-0

MDL number:MFCD00079053

EINECS number:208-272-4

RTECS number:None

BRN number:4122778

PubChem ID:None

Physical property data

1. Character: light red hexagonal or quadrilateral plate crystal


2. Density (g/ cm3,25/4): Undetermined


3. Relative vapor density (g/cm3,AIR=1): Undetermined


4. Melting point (ºC):183-185


5. Boiling point (ºC,Normal pressure): Undetermined


6. Boiling point (ºC,8kPa): Undetermined


7. Refractive Index: Undetermined


8. Flash Point (ºF): Undetermined


9. Specific optical rotation (º): Undetermined


10. Autoignition point or ignition temperature (ºC): Undetermined


11. Vapor pressure (kPa,25ºC): Undetermined


12. Saturated vapor pressure (kPa,60ºC): Undetermined


13. Heat of combustion (KJ/mol): Undetermined


14. Critical temperature (ºC): Undetermined


15. Critical pressure (KPa): Undetermined


16. Oil and water (octanol/Log value of partition coefficient (water): Undetermined


17. Explosion limit (%,V/V): Undetermined


18. Lower explosion limit (%,V/V): Undetermined


19. Solubility:Soluble in methanol, ethanol and ethyl acetate, almost insoluble in ether and acetone

Toxicological data

None yet

Ecological data

Generally not hazardous to water, do not discharge material into the surrounding environment without government permission.

Molecular structure data

None yet

Compute chemical data

1. Hydrophobic parameters Calculate the reference value (XlogP):


2. Hydrogen Bonding Number of donors: 0


3. Hydrogen Bonding Number of receptors: 10


4. Rotatable Number of chemical bonds: 23


5. Interchange Number of isomers: 3


6. Topological molecules Polar surface area (TPSA): 114


7. Heavy Atom Quantity: 66


8. Surface charge :0


9. Complexity :2180


10. Isotope atomic number:0


11. Determine the number of atomic stereocenters:2


12. Uncertain number of atomic stereocenters:3


13. Determine the number of stereocenters of chemical bonds:1


14. Uncertain number of chemical bond stereocenters:0


15. Number of covalent bond units:2

Properties and stability

Chlorophyllc: slightly red hexagon Or quadrilateral plate crystal. Soluble in methanol, ethanol and ethyl acetate, almost insoluble in ether and acetone. Maximum absorption value (acetone)628,580,442nm .

Storage method

Stored in a cool, dry, well-ventilated warehouse. Keep away from fire and heat sources. Protect from direct sunlight. The packaging is sealed. They should be stored separately from acids and food chemicals, and avoid mixed storage. Suitable materials should be available in the storage area to contain spills.

Synthesis method

Most of them use plants (such as spinach, etc.) or dried silkworm sand as raw materials to extract chlorophyll. For example, the following method can be used to extract chlorophyll from silkworm sand. Organic solvent extraction: take clean silkworm sand and use 70%Make the above industrial ethanol into a slurry, filter out the dark green solution, and then dry it. Another operation is to 45Parts of petroleum ether,15 parts of methanol, 4mix benzene, mix with clean silkworm sand to make a slurry, filter, and wash the filtrate with water4times. Add a small amount of sodium sulfate to the organic extract to remove residual moisture. Filter and recover the solvent from the filtrate to obtain chlorophyll. Physical separation: 0.4mol/LDilute sucrose liquid and0.06mol/LPotassium phosphate dilute solution (pHfor6-7) Press11Mix into buffer medium. per2kgSilkworm Sand Plus1LMix the left and right buffer media evenly, filter out the green suspension with multiple layers of emery cloth, and centrifuge in a low-temperature centrifuge5-10min, wash the precipitate with water , centrifuge again to obtain chlorophyll precipitate. Chlorophyll is treated with oxalic acid to obtain magnesium-free pheophytin, and then magnesium is introduced and converted back into chlorophyll. Removal of phytol and magnesium with strong acid results in pheophorbide, and phytol can also be reintroduced. Hydrolysis removes phytol and methanol to obtain chlorophyllin. Most of them use plants (such as spinach, etc.) or dried silkworm sand as raw materials to extract chlorophyll. For example, the following method can be used to extract chlorophyll from silkworm sand. Organic solvent extraction: take clean silkworm sand and use 70%Make the above industrial ethanol into a slurry, filter out the dark green solution, and then dry it. Another operation is to 45Parts of petroleum ether,15 parts of methanol, 4parts of benzene mixed with Mix clean silkworm sand into pulp, filter, and wash the filtrate with water4times. Add a small amount of sodium sulfate to the organic extract to remove residual moisture, filter, and recover the solvent from the filtrate to obtain chlorophyll. Physical separation: 0.4mol/LDilute sucrose solution and 0.06mol/LPotassium Phosphate Solution (pH for6-7) Press 11 Mix into buffered medium. Every2kgSilkworm sand plus 1LLeft and right buffer media, Mix evenly, filter out the green suspension with multi-layer emery cloth, and centrifuge in a low-temperature centrifuge5-10min, wash the precipitate with water, and centrifuge again to obtain the chlorophyll precipitate. Chlorophyll is treated with oxalic acid to obtain magnesium-free pheophytin, and then magnesium is introduced and converted back into chlorophyll. Removal of phytol and magnesium with strong acid results in pheophorbide, and phytol can also be reintroduced. Hydrolysis removes phytol and methanol to obtain chlorophyllin.

Purpose

Chlorophyll is used in soaps , mineral oil, wax and essential oil coloring. Derivatives of chlorophyll or chlorophyllin, such as copper chlorophyll[11006-34-1], sodium iron chlorophyllate, sodium copper chlorophyllin, used as colorants and deodorants in food, candy, beverages, toothpaste, etc. Chlorophyllin derivatives can be used together with the fungicides benzalkonium chloride, halocarban, etc. to formulate smelly cosmetics.

Resource:allhdi.com

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/21421

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search