Term amine catalyst LE-530: Provide technical support for the manufacture of high-strength polyurethane adhesives

Introduction

Polyurethane adhesives are widely used in construction, automobile, electronics, packaging and other fields due to their excellent bonding properties, chemical resistance and mechanical strength. However, the properties of polyurethane adhesives depend to a large extent on the catalyst used in their manufacturing process. As a highly efficient and environmentally friendly catalyst, the tertiary amine catalyst LE-530 provides strong technical support for the manufacture of high-strength polyurethane adhesives. This article will introduce in detail the product parameters, mechanism of action, application advantages and application cases in actual production of tertiary amine catalyst LE-530.

1. Product parameters of tertiary amine catalyst LE-530

Term amine catalyst LE-530 is a highly efficient polyurethane reaction catalyst with the following main product parameters:

parameter name	parameter value
Chemical Name	Term amine compounds
Appearance	Colorless to light yellow transparent liquid
Density (20°C)	0.95-1.05 g/cm³
Viscosity (25°C)	50-100 mPa·s
Flashpoint	>100°C
Solution	Easy soluble in water and organic solvents
pH value	8.0-10.0
Storage temperature	5-30°C
Shelf life	12 months

2. The mechanism of action of tertiary amine catalyst LE-530

Term amine catalyst LE-530 mainly plays the following role in polyurethane reaction:

1. Accelerate the reaction between isocyanate and polyol: The tertiary amine catalyst LE-530 can significantly reduce the activation energy of the reaction between isocyanate and polyol, thereby accelerating the reaction rate and shortening the reaction time.
2. Confirmation of reaction selectivity: By adjusting the amount of catalystand reaction conditions, the selectivity of the polyurethane reaction can be controlled, thereby obtaining polyurethane products with different properties.
3. Improving reaction uniformity: The tertiary amine catalyst LE-530 can uniformly distribute various components in the reaction system, thereby improving the uniformity and stability of polyurethane products.

III. Application advantages of tertiary amine catalyst LE-530

Term amine catalyst LE-530 has the following application advantages in the manufacture of high-strength polyurethane adhesives:

1. High-efficiency Catalysis: The tertiary amine catalyst LE-530 can significantly increase the rate of polyurethane reaction, shorten the production cycle, and improve production efficiency.
2. Environmental Safety: The tertiary amine catalyst LE-530 does not contain heavy metals and harmful substances, meets environmental protection requirements, and is safe to use.
3. Excellent performance: Polyurethane adhesives made using the tertiary amine catalyst LE-530 have excellent bonding strength, chemical resistance and mechanical properties.
4. Wide application scope: Tertiary amine catalyst LE-530 is suitable for a variety of polyurethane systems, including soft bubbles, hard bubbles, elastomers, coatings, adhesives, etc.

IV. Application cases of tertiary amine catalyst LE-530 in actual production

Case 1: High-strength polyurethane adhesive for construction

In the construction industry, high-strength polyurethane adhesives are widely used in wall insulation, roof waterproofing, floor bonding and other fields. Polyurethane adhesives made using the tertiary amine catalyst LE-530 have the following characteristics:

• High bonding strength: Can firmly bond various building materials, such as concrete, metal, wood, etc.
• Good weather resistance: Can maintain stable performance under harsh climate conditions.
• Construction is convenient: It has good fluidity and operability, making it easy to construct.

Case 2: High-strength polyurethane adhesive for automobiles

In automobile manufacturing, high-strength polyurethane adhesives are used for body structure bonding, interior parts fixing, sealing, etc. Polyurethane adhesives made using the tertiary amine catalyst LE-530 have the following characteristics:

• High mechanical strength: able to withstand vibration and impacts during driving of a car.
• High temperature resistance: Can maintain stable performance in high temperature environments.
• Environmental Safety: Comply with the environmental protection requirements of the automotive industry and use safety.

Case 3: High-strength polyurethane adhesive for electronics

In the electronics industry, high-strength polyurethane adhesives are used for circuit board fixation, component packaging, cable bonding, etc. Polyurethane adhesives made using the tertiary amine catalyst LE-530 have the following characteristics:

• High insulation: It has good electrical insulation performance, suitable for packaging and fixing of electronic components.
• Chemical resistance: It can resist the corrosion of various chemical substances and protect electronic components.
• High-precision bonding: Can achieve accurate bonding of micro components and improve the reliability of electronic products.

V. How to use the tertiary amine catalyst LE-530

When using the tertiary amine catalyst LE-530 to make high-strength polyurethane adhesive, the following usage methods should be paid attention to:

1. Catalytic Dosage: According to the specific polyurethane system and reaction conditions, the amount of catalyst should be adjusted reasonably, and the usual amount should be 0.1-1.0%.
2. Reaction temperature: Control the reaction temperature between 20-80°C to avoid excessive high or low temperature affecting the reaction effect.
3. Stirring speed: Maintain appropriate stirring speed to make the components in the reaction system evenly mix.
4. Reaction time: According to the amount of catalyst and reaction conditions, the reaction time should be reasonably controlled to ensure the complete reaction.

VI. Storage and transportation of tertiary amine catalyst LE-530

The following things should be paid attention to during storage and transportation of tertiary amine catalyst LE-530:

1. Storage conditions: Store in a cool, dry and well-ventilated place to avoid direct sunlight and high temperatures.
2. Packaging Specifications: Usually packaged in 25kg or 200kg plastic buckets, and can also be customized according to customer needs.
3. Transportation requirements: Severe vibrations and collisions should be avoided during transportation to prevent packaging from being damaged.

VII. Market prospects of tertiary amine catalyst LE-530

With the wide application of polyurethane adhesives in various fields, the tertiary amine catalyst LE-530As an efficient and environmentally friendly catalyst, it has broad market prospects. In the future, with the continuous improvement of environmental protection requirements and the continuous development of polyurethane technology, the tertiary amine catalyst LE-530 will be used in more fields to provide more powerful technical support for the manufacture of high-strength polyurethane adhesives.

Conclusion

Term amine catalyst LE-530 is an efficient and environmentally friendly polyurethane reaction catalyst and has important application value in the manufacture of high-strength polyurethane adhesives. By rationally using the tertiary amine catalyst LE-530, the performance and production efficiency of polyurethane adhesives can be significantly improved, and the application needs in different fields can be met. In the future, with the continuous advancement of technology and the continuous expansion of the market, the tertiary amine catalyst LE-530 will play a more important role in the polyurethane industry.

Extended reading:https://www.newtopchem.com/archives/97

Extended reading:https://www.newtopchem.com/archives/915

Extended reading:<a href="https://www.newtopchem.com/archives/915

Extended reading:https://www.newtopchem.com/archives/44561

Extended reading:https://www.newtopchem.com/archives/683

Extended reading:https://www.bdmaee.net/wp-content/uploads/2022/08/-NCM-PC-CAT-NCM-polyester-sponge-catalyst--NCM.pdf

Extended reading:https://www.bdmaee.net/nt-cat-a-304-catalyst-cas1739-84-0-newtopchem/

Extended reading:https://www.bdmaee.net/soft-foam-pipeline-composite-amine-catalyst/

Extended reading:https://www.newtopchem.com/archives/1015

Extended reading:https://www.bdmaee.net/niax-nmm-tertiary-amine-catalysts-momentive/

Extended reading:https://www.newtopchem.com/archives/1758