Niax A-501 Catalyst CAS3033-62-3 Momentive

Overview:

Niax A-501 is bis(dimethylaminoethyl) ether, also known as catalystA1, CatalystA-1, BDMAEE. 70%Double(Dimethylaminoethyl)Dipropylene glycol solution of ether, strong foaming catalyst, usually called catalyst in the domestic industryA-1orA1. A1The catalyst is mainly used for soft Polyether type polyurethane foam production can also be used for packaging rigid foam. A1 has a particularly strong accelerating effect on water, so it can reduce the foam density. It is used to control about 80% of the reactions that produce gases. It is used to control The efficacy of the gel reaction accounts for about20%. The catalyst has high activity and low dosage. By adjusting the dosage of this series, the foaming rise and gel time can be controlled.

Product introduction

Niax A-501 is bis(dimethylaminoethyl) ether, also known as catalystA1, CatalystA- 1, BDMAEE. 70%Double(Dimethylaminoethyl)Dipropylene glycol solution of ether, strong foaming catalyst, usually called catalyst in the domestic industryA-1orA1. A1The catalyst is mainly used in the production of soft polyether polyurethane foam, and can also be used Use hard foam for packaging. A1 has a particularly strong accelerating effect on water, so it can reduce the foam density. It is used to control about 80% of the reactions that produce gases. It is used to control The efficacy of the gel reaction accounts for about20%. The catalyst has high activity and low dosage. By adjusting the dosage of this series, the foaming rise and gel time can be controlled. A1shared with organotin catalyst can significantly improve the production tolerance of foam plastics , to ensure that unnecessary quality problems are not caused by careless operation or small errors in the measurement system during production, and high-quality flexible foam plastics are produced. A1Catalyst is widely used in various formulations for manufacturing polyurethane foam, especially suitable for For the production of high resilience, semi-rigid foam and low density foam plastics.

Bis (dimethylaminoethyl) ether, abbreviation:<span style=Degree (25℃):4.1mPa.s; Density (25 ℃):0.902g/cm3; Flash point (PMCC):74℃; vapor pressure (20℃):1.3Pa; Boiling Cheng: 186-226℃.

Packaging

Packed in clean, dry, sealed, leak-free special plastic barrels, net weight per barrel25kg.

Safety information

CatalystA-1It has a certain degree of toxicity. After contact with the skin, wash it with soapy water in time. Workers can wear goggles or safety glasses to protect their eyes. Eyewash and shower equipment should be provided near the workplace. When working in places that may come into contact with products, you should pay attention to personal hygiene and use detergents to clean the skin in contact with the products before eating, smoking, and leaving the workplace.

Leakage processing

Prevent leaks as much as possible while ensuring safety. If a minor leak is found, it can be treated with sand or other absorbent materials, and then placed in a clean, dry container for subsequent processing. If a large amount of leakage occurs, the leaked materials should be collected for subsequent treatment. Materials should be avoided from entering groundwater or surface water, as they are not easily degraded by organisms. All collected leaked materials should be disposed of in accordance with the relevant regulations of the local environmental protection department.

Disclaimer

The information and technical advice provided above are obtained from our reliable sources, however, we are not satisfied with the data provided There is no express or implied guarantee, and we do not make any promises here. If you need to use our products, we recommend that they undergo a series of tests. The application, use, processing or production of products based on the technical information we provide are beyond our control, so these responsibilities are borne by the user. The conditions and methods of handling, storage, use or disposal of this product are beyond our control and may be beyond our knowledge. We will not under any circumstances be responsible for improper handling, Responsible for any loss, damage or related expenses caused by storage, use or disposal of this chemical. For more information, please view the technical safety instructions of our products or contact our marketing service department.

Shelf life:

Keep unopened, two years

Storage and Transportation：

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/Barrel storage: It is recommended to store in a dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent moisture and other substances from being mixed in and affecting product performance. Do not breathe dust, Avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and launder before use. Maintain good hygiene habits.

Technical and business phone number ：183 0190 3156

-size: 16px”>Storage and transportation：

should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/Barrel storage: It is recommended to store in a dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent moisture and other substances from being mixed in and affecting product performance.Do not breathe dust, Avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before using them. Maintain good hygiene habits.

Technical and business phone number ：183 0190 3156

Our Company

Since its establishment, the company has adhered to the service tenet of “integrity-based, customer first”, adhered to customer demand as the focus, market-oriented, adhered to technological innovation, management innovation and service innovation, and constantly implemented lean production, refined management, to provide customers with better products and services! The company has its own factory, research and development base, set up a strict scientific quality management system, and constantly committed to technological innovation, product innovation and management innovation, so as to ensure that our products have a certain competitiveness in the same industry. The factory is located in Jining City, Shandong Province, China, covering an area of 500 acres, and the current production capacity of various types of amines is 5,000 to 10,000 tons per year.

Our Advantages

Strict Quality Management
Our company strictly implements ISO9002 quality management standards and has established a complete quality management system to ensure the long-term stability of product quality.

Efficient Service
Our production is efficient and reliable, so we deliver on time and within delivery deadlines. At the same time, our team is always happy to help customers and strive to solve customer problems in a short time.

Competitive Price
We have long-term services in wholesale Polyurethane catalyst and have established long-term and stable cooperative relationships with many retailers and agents to provide our customers with reasonably priced products.

OEM Available
Our employee team has high R&D capabilities, superb design and development capabilities, skilled manufacturing technology, and rich product application experience, and can also meet OEM business needs.throughout the entire industry chain.