Polyether_Polyether Polyol Other Polyether Lupragen N205 catalyst bis(dimethylaminoethyl) ether BASF

Lupragen N205 catalyst bis(dimethylaminoethyl) ether BASF

Overview:

Alias: Bis(dimethylaminoethyl) ether, English abbreviationBDMAEE, is a foaming catalyst and also a polyurethane foaming catalyst
Full English name:bis( 2,dimethylaminoethyl)ether; 2,2′-oxybis(N,N-dimethylethylamine)
Molecular formula:C8H20N2O

CAS NO3033-62-3

alias

bisdimethylaminoethyl ether

English name

bis(2,dimethylaminoethyl)ether; 2,2′-oxybis(N,N- dimethylethylamine)

Molecular formula

C8H20N2O

CASNO

3033-62-3

viscosity (25℃

1.4mPa.s

Density (25℃)

0.85g/cm3

Flashpoint

64-68℃

Bis(dimethylaminoethyl) ether

CatalystBDMAEE

Foaming CatalystBDMAEE

Polyurethane CatalystBDMAEE

BDMAEE

Foaming CatalystBDMAEE

Polyurethane foaming catalystBDMAEE

Physical and chemical properties:
Light yellow transparent liquid, soluble in water, water-soluble is alkaline.

Density (25℃) :0.85g/cm3
Flash point:64-68℃

Boiling point:189℃

Vapor pressure (21℃):37Pa
Flash point:160℃Freezing point: below -70℃

Safety information

The catalyst has a certain degree of toxicity, please wash it with soapy water immediately after contact with the skin. Workers can wear goggles or safety glasses to protect their eyes. Eyewash and shower equipment should be provided near the workplace. When working in places that may come into contact with products, you should pay attention to personal hygiene and use detergents to clean the skin in contact with the products before eating, smoking, and leaving the workplace.

Leakage processing

Prevent leaks as much as possible while ensuring safety. If a minor leak is found, it can be treated with sand or other absorbent materials, and then placed in a clean, dry container for subsequent processing. If a large amount of leakage occurs, the leaked materials should be collected for subsequent treatment. Materials should be avoided from entering groundwater or surface water, as they are not easily degraded by organisms. All collected leaked materials should be disposed of in accordance with the relevant regulations of the local environmental protection department.

Disclaimer

The information and technical advice provided above are obtained from our reliable sources, however, we are not satisfied with the data provided There is no express or implied guarantee, and we do not make any promises here. If you need to use our products, we recommend that they undergo a series of tests. The application, use, processing or production of products based on the technical information we provide are beyond our control, so these responsibilities are borne by the user. The conditions and methods of handling, storage, use or disposal of this product are beyond our control and may be beyond our knowledge. We will not under any circumstances be responsible for improper handling, Responsible for any loss, damage or related expenses caused by storage, use or disposal of this chemical. For more information, please view the technical safety instructions of our products or contact our marketing service department.

Shelf life:

Keep unopened, two years

Storage and Transportation

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/Barrel storage: It is recommended to store in a dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent moisture and other substances from being mixed in and affecting product performance. Do not breathe dust, Avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and launder before use. Maintain good hygiene habits.

Technical and business phone number 183 0190 3156

-justify:inter-ideograph”>Shelf life:

Keep unopened, two years

Storage and Transportation

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/Barrel storage: It is recommended to store in a dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent moisture and other substances from being mixed in and affecting product performance. Do not breathe dust, Avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and launder before use. Maintain good hygiene habits.

Technical and business phone number 183 0190 3156


Our Company

Since its establishment, the company has adhered to the service tenet of “integrity-based, customer first”, adhered to customer demand as the focus, market-oriented, adhered to technological innovation, management innovation and service innovation, and constantly implemented lean production, refined management, to provide customers with better products and services! The company has its own factory, research and development base, set up a strict scientific quality management system, and constantly committed to technological innovation, product innovation and management innovation, so as to ensure that our products have a certain competitiveness in the same industry. The factory is located in Jining City, Shandong Province, China, covering an area of 500 acres, and the current production capacity of various types of amines is 5,000 to 10,000 tons per year.

Our Advantages

Strict Quality Management
Our company strictly implements ISO9002 quality management standards and has established a complete quality management system to ensure the long-term stability of product quality.

Efficient Service
Our production is efficient and reliable, so we deliver on time and within delivery deadlines. At the same time, our team is always happy to help customers and strive to solve customer problems in a short time.

Competitive Price
We have long-term services in wholesale Polyurethane catalyst and have established long-term and stable cooperative relationships with many retailers and agents to provide our customers with reasonably priced products.

OEM Available
Our employee team has high R&D capabilities, superb design and development capabilities, skilled manufacturing technology, and rich product application experience, and can also meet OEM business needs.throughout the entire industry chain.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/7256

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search