​ Niax LC-5630 Thermal Sensitive Catalyst Momentive

Overview:

Niax Catalyst LC-5630 is a heat-sensitive catalyst, has no catalytic effect at room temperature, and the temperature reaches 70℃ begins to catalyze the formation of urethane bonds;

Product Description

NIAX*CatalystLC-5630It is a unique metal-based delayed gel catalyst, specially designed for use in mechanical foam. Mechanical foam technology uses a high-shear mechanical mixer to disperse the mixed gas into the polyurethane system to prepare the backing material. Without adding physical foaming agent, the density of polyurethane foam produced by this technology is generally 290-320KG/M3. Adding a small amount of water can reduce the density to 190-225KG/M3, this type of foam It is widely used in carpet backing, car headrests and door linings, special fabrics, gaskets, seals and double-sided tapes.

Typical characteristics

–Super delay effect

– Unique temperature-sensitive catalytic effect

–Provide foam with better mechanical properties

–Low Viscosity

Physical properties

Appearance

Green clear liquid or slightly precipitated and turbid

Viscosity@ 25°C, cSt

5

Proportion(25°C), g/cc

1.038

Flashpoint, °C

93

LC-5630is relatively inert at room temperature, higher than 70°C ; the dosage in mechanical foam foam is about 2-4 per 100 parts of polyol share, in135-150 °C The curing time is 4 about minutes.

Safety information

Rinse the catalyst promptly with soapy water after contact with the skin. Staff can wear eye protection Or safety glasses to protect your eyes. Eyewash and shower equipment should be equipped near the workplace. When working in places that may come into contact with products, you should pay attention to personal hygiene and use cleaning products to clean the eyes before eating, smoking, and leaving the workplace. Clean the skin in contact with the product.

Leakage handling

Stop the leak as much as possible while ensuring safety. If a minor leak is found, use sand or other absorbent materials Materials are processed and then placed in a clean, dry container for subsequent processing. If a large amount of leakage occurs, the leaked materials should be collected for subsequent treatment. Materials should be avoided from entering groundwater or surface water, as they are not easily degraded by organisms. All collected leaked materials should be disposed of in accordance with the relevant regulations of the local environmental protection department.

Disclaimer

The information and technical advice provided above are obtained from our reliable sources, however, we are not satisfied with the data provided There is no express or implied guarantee, and we do not make any promises here. If you need to use our products, we recommend that they undergo a series of tests. The application, use, processing or production of products based on the technical information we provide are beyond our control, so these responsibilities are borne by the user. The conditions and methods of handling, storage, use or disposal of this product are beyond our control and may be beyond our knowledge. We will not under any circumstances be responsible for improper handling, Responsible for any loss, damage or related expenses caused by storage, use or disposal of this chemical. For more information, please view the technical safety instructions of our products or contact our marketing service department.

Shelf life:

Keep unopened, two years

Storage and transportation:

When storing catalysts, they should be stored at room temperature in a ventilated and dry warehouse, avoid being in a humid environment, and store The storage temperature should be kept below 25℃ and avoid sunlight as much as possible Exposure to the sun, away from water and heat sources. To prevent moisture absorption and oxidation, it is recommended to fill the container with nitrogen.

Packaging:

200KG/Barrel storage: It is recommended to store in a dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent moisture and other substances from being mixed in and affecting product performance. Do not breathe dust, Avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and launder before use. Maintain good hygiene habits.

Technical and business phone number ：183 0190 3156

Fasten the packaging lid quickly to prevent moisture and other substances from mixing in and affecting product performance. Do not breathe dust, Avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and launder before use. Maintain good hygiene habits.

Technical and business phone number ：183 0190 3156

Our Company

Since its establishment, the company has adhered to the service tenet of “integrity-based, customer first”, adhered to customer demand as the focus, market-oriented, adhered to technological innovation, management innovation and service innovation, and constantly implemented lean production, refined management, to provide customers with better products and services! The company has its own factory, research and development base, set up a strict scientific quality management system, and constantly committed to technological innovation, product innovation and management innovation, so as to ensure that our products have a certain competitiveness in the same industry. The factory is located in Jining City, Shandong Province, China, covering an area of 500 acres, and the current production capacity of various types of amines is 5,000 to 10,000 tons per year.

Our Advantages

Strict Quality Management
Our company strictly implements ISO9002 quality management standards and has established a complete quality management system to ensure the long-term stability of product quality.

Efficient Service
Our production is efficient and reliable, so we deliver on time and within delivery deadlines. At the same time, our team is always happy to help customers and strive to solve customer problems in a short time.

Competitive Price
We have long-term services in wholesale Polyurethane catalyst and have established long-term and stable cooperative relationships with many retailers and agents to provide our customers with reasonably priced products.

OEM Available
Our employee team has high R&D capabilities, superb design and development capabilities, skilled manufacturing technology, and rich product application experience, and can also meet OEM business needs.throughout the entire industry chain.