​ FASCAT2003 Catalyst Stannous Octanoate Arkema PMC

Overview:

Alias:FASCAT2003 catalyst, Stannous octoate, polyurethane catalyst, stannous octoate D19, stannous octoate T-9, gel catalyst T-9

Related Categories: Organotin; Organometallic reagents; Catalysts; Metals Organic matter; organic chemical raw materials; biochemical reagents; analytical grade; organic chemical raw materials; pharmaceutical raw materials; additives; Organic-metalsalt; metalcarboxylate; curingagent

Stannous octoate ( stannous octoate) is a basic catalyst for the production of polyurethane foam, room temperature curing silicone rubber, polyurethane rubber, and polyurethane coating catalysts. Chemical properties are extremely unstable and easily oxidized.

Physical and chemical properties:

Molecular formula(Formula): C16H30O4Sn

Molecular Weight(Molecular Weight): 405.10

CAS No: 301-10-0

Density1.251

Tin content: 28+/-0.50%

Main ingredients: content: (calculated as tin) is about 22%, and the total tin is about 23%.

Appearance and properties: white or yellow paste.

Relative density(水=1):1.251

Flash Point(℃) gt;110

Freezing point:-20℃

Viscosity(25℃): ≤380MPa•s

Refractive index:1.492

Solubility: insoluble in water, soluble in petroleum ether and polyols

Leakage handling

Prevent leaks as much as possible while ensuring safety. If a minor leak is found, it can be treated with sand or other absorbent materials, and then placed in a clean, dry container for subsequent processing. If a large amount of leakage occurs, the leaked materials should be collected for subsequent treatment. Materials should be avoided from entering groundwater or surface water, as they are not easily degraded by organisms. All collected leaked materials should be disposed of in accordance with the relevant regulations of the local environmental protection department.

Disclaimer

The information and technical advice provided above are obtained from our reliable sources, however, we are not satisfied with the data provided There is no express or implied guarantee, and we do not make any promises here. If you need to use our products, we recommend that they undergo a series of tests. The products that are applied, used, processed or produced based on the technical information provided by us are not ours are beyond our control and therefore these responsibilities rest with the user. The conditions and methods of handling, storage, use or disposal of this product are beyond our control and may be beyond our knowledge. We will not under any circumstances be responsible for improper handling, Responsible for any loss, damage or related expenses caused by storage, use or disposal of this chemical. For more information, please view the technical safety instructions of our products or contact our marketing service department.

Safety information ：

Catalyst, rinse promptly with soapy water after contact with skin. Workers can wear goggles or safety glasses to protect their eyes. Eyewash and shower equipment should be provided near the workplace. When working in places that may come into contact with products, you should pay attention to personal hygiene and use detergents to clean the skin in contact with the products before eating, smoking, and leaving the workplace.

Shelf life:

Keep unopened, two years

Storage and Transportation：

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/Barrel storage: It is recommended to store in a dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent moisture and other substances from being mixed in and affecting product performance. Do not breathe dust, Avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and launder before use. Maintain good hygiene habits.

Technical and business phone number ：183 0190 3156

Our Company

Since its establishment, the company has adhered to the service tenet of “integrity-based, customer first”, adhered to customer demand as the focus, market-oriented, adhered to technological innovation, management innovation and service innovation, and constantly implemented lean production, refined management, to provide customers with better products and services! The company has its own factory, research and development base, set up a strict scientific quality management system, and constantly committed to technological innovation, product innovation and management innovation, so as to ensure that our products have a certain competitiveness in the same industry. The factory is located in Jining City, Shandong Province, China, covering an area of 500 acres, and the current production capacity of various types of amines is 5,000 to 10,000 tons per year.

Our Advantages

Strict Quality Management
Our company strictly implements ISO9002 quality management standards and has established a complete quality management system to ensure the long-term stability of product quality.

Efficient Service
Our production is efficient and reliable, so we deliver on time and within delivery deadlines. At the same time, our team is always happy to help customers and strive to solve customer problems in a short time.

Competitive Price
We have long-term services in wholesale Polyurethane catalyst and have established long-term and stable cooperative relationships with many retailers and agents to provide our customers with reasonably priced products.

OEM Available
Our employee team has high R&D capabilities, superb design and development capabilities, skilled manufacturing technology, and rich product application experience, and can also meet OEM business needs.throughout the entire industry chain.