Polyether_Polyether Polyol Other Polyether Covestro (formerly Bayer) Desmodur 44C Pure MDI 101-68-8

Covestro (formerly Bayer) Desmodur 44C Pure MDI 101-68-8

                                                                             

Product Introduction
DESMODUR 44C is a 4,4′-diphenylmethane diisocyanate monomer with a molecular weight of 250 and is non-toxic at room temperature. Color to light yellow solid. This product is mainly used in the production of polyurethane products.

Sampling
Prevent the product from coming into contact with water vapor during the sampling process.

Specifications

Project

Indicators

Unit

Test method

2,4′-MDIContent

≤1.8

%

20110367601-92

Hydrolyzed chloride content

≤50

ppm

2011-0339304-95

Dimer content*

≤0.1

%

2012-0346901-92

Typical properties                                                /p>

Project

Indicators

Unit

Test method

Purity (molecular weight250)

≥99.5

%

2011-0248603-94

NCOContent (theoretical value)

33.6

%

Phenyl isocyanate content

≤10

ppm

2011-0339304-95

Viscosity (40℃)

0.1

mPa.s

2011-0313703-95

Density (40℃)

1.19

g/cm³

DIN 51757

Specific heat (cp)

about1.39

kJ/kg.K

Heat of solution

about102

J/g

Packaging
DESMODUR 44C has two supply methods:
– Liquid (tank truck)
– Solid (barrel, net weight 225 kg)

Save

Recommended storage temperature ()

5 (solid), span>43±2(Liquid)

Shelf life

≤3months (solid), ≤3weeks in the storage tank (liquid ) If stored in a sealed and drained state

Operation suggestions
Like all isocyanates, DESMODUR 44C is very sensitive to water and reacts with water to produce insoluble urea and carbon dioxide. In a closed container, the carbon dioxide produced will cause the pressure in the container to rise and cause danger.
When DESMODUR 44C is exposed to air, especially sunlight, it will accelerate its yellowing. Therefore, it is recommended to store liquid DESMODUR 44C in a dry nitrogen environment. Yellowing generally does not affect the processability of the product.
DESMODUR 44C is sensitive to heat and will form dimers. Solid DESMODUR 44C is more prone to dimerization reaction at room temperature than liquid state at 45°C. Therefore, solid products need to be stored below 5°C and melt gradually and quickly before use. Although the dimerization rate of the product decreases as the temperature decreases, the stability is still limited even below 5°C.
Solid DESMODUR 44C needs to be heated to ≥70°C for melting. This process will increase the formation of insoluble dimers, and may cause the barrel to deform due to the increase in temperature and pressure.

olor:#f1c40f”> Operation suggestions
Like all isocyanates, DESMODUR 44C is very sensitive to water and reacts with water to produce insoluble urea and carbon dioxide. In a closed container, the carbon dioxide produced will cause the pressure in the container to rise and cause danger.
When DESMODUR 44C is exposed to air, especially sunlight, it will accelerate its yellowing. Therefore, it is recommended to store liquid DESMODUR 44C in a dry nitrogen environment. Yellowing generally does not affect the processability of the product.
DESMODUR 44C is sensitive to heat and will form dimers. Solid DESMODUR 44C is more prone to dimerization reaction at room temperature than liquid state at 45°C. Therefore, solid products need to be stored below 5°C and melt gradually and quickly before use. Although the dimerization rate of the product decreases as the temperature decreases, the stability is still limited even below 5°C.
Solid DESMODUR 44C needs to be heated to ≥70°C for melting. This process will increase the formation of insoluble dimers, and may cause the barrel to deform due to the increase in temperature and pressure.


Our Company

Since its establishment, the company has adhered to the service tenet of “integrity-based, customer first”, adhered to customer demand as the focus, market-oriented, adhered to technological innovation, management innovation and service innovation, and constantly implemented lean production, refined management, to provide customers with better products and services! The company has its own factory, research and development base, set up a strict scientific quality management system, and constantly committed to technological innovation, product innovation and management innovation, so as to ensure that our products have a certain competitiveness in the same industry. The factory is located in Jining City, Shandong Province, China, covering an area of 500 acres, and the current production capacity of various types of amines is 5,000 to 10,000 tons per year.

Our Advantages

Strict Quality Management
Our company strictly implements ISO9002 quality management standards and has established a complete quality management system to ensure the long-term stability of product quality.

Efficient Service
Our production is efficient and reliable, so we deliver on time and within delivery deadlines. At the same time, our team is always happy to help customers and strive to solve customer problems in a short time.

Competitive Price
We have long-term services in wholesale Polyurethane catalyst and have established long-term and stable cooperative relationships with many retailers and agents to provide our customers with reasonably priced products.

OEM Available
Our employee team has high R&D capabilities, superb design and development capabilities, skilled manufacturing technology, and rich product application experience, and can also meet OEM business needs.throughout the entire industry chain.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/8465

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search