Polyether_Polyether Polyol Other Polyether Covestro Desmophen C1200 linear polycarbonate diol 2000 molecular weight liquid

Covestro Desmophen C1200 linear polycarbonate diol 2000 molecular weight liquid

Type

Linear aliphatic polycarbonate polyester

Supply form

Solvent-free medium viscosity liquid

Purpose

Used as a base for advanced flexible coatings and sealing primers

Product Specifications                                                                                   

Features

Value

Measurement units

Method

HazenColor value

≤200

DIN EN 1557

acid value

≤0.1

Equivalent

about1,000

Flashpoint

about224

°C

DIN EN ISO 2719

Density@20

About1.10

g/ml

DIN EN ISO 2811-2

*The above values ​​are general information and are not part of product specifications.

Solubility/Dilution            
Generally, it has good miscibility with the following solvents, but the storage stability of the prepared solution must be tested.
Desmophen® C1200 can be diluted with esters, ketones, aromatic hydrocarbons and ether ester solvents. Solutions with low base content will cause turbidity and sedimentation after long-term storage.
Urethane grade solvents should be used (water content <0.05%, no other active impurities).

Compatibility
Desmophen® C1200 can be mixed with many Desmophen® and Desmodur® products. Considering the wide variety of miscible products, products should be tested for compatibility before use.

Application                                                        
Coatings and sealing primers prepared with Desmophen ® C1200 and aliphatic isocyanates have good weathering and hydrolysis resistance. Other uses include decorative coatings, sealants and sealants.

Save
Desmophen C1200 is easily hygroscopic and should be stored sealed in the original container. This product has a shelf life of at least 6 months when stored in the original container under appropriate conditions.
Storage at low temperatures may form crystalline precipitates. The crystallized material can be melted by slow heating at a temperature not exceeding 60°C.

Safety: Hazard Identification
According to relevant standards (Council Directive 67/548/EEC or 199/45/EC), this product is not classified as dangerous goods.
The Safety Data Sheet (953249) should be read carefully. It includes information on labeling, transportation and storage, as well as information on product use, product safety and ecology.

Crystalline precipitates may form. The crystallized material can be melted by slow heating at a temperature not exceeding 60°C.

Safety: Hazard Identification
According to relevant standards (Council Directive 67/548/EEC or 199/45/EC), this product is not classified as dangerous goods.
The Safety Data Sheet (953249) should be read carefully. It includes information on labeling, transportation and storage, as well as information on product use, product safety and ecology.


Our Company

Since its establishment, the company has adhered to the service tenet of “integrity-based, customer first”, adhered to customer demand as the focus, market-oriented, adhered to technological innovation, management innovation and service innovation, and constantly implemented lean production, refined management, to provide customers with better products and services! The company has its own factory, research and development base, set up a strict scientific quality management system, and constantly committed to technological innovation, product innovation and management innovation, so as to ensure that our products have a certain competitiveness in the same industry. The factory is located in Jining City, Shandong Province, China, covering an area of 500 acres, and the current production capacity of various types of amines is 5,000 to 10,000 tons per year.

Our Advantages

Strict Quality Management
Our company strictly implements ISO9002 quality management standards and has established a complete quality management system to ensure the long-term stability of product quality.

Efficient Service
Our production is efficient and reliable, so we deliver on time and within delivery deadlines. At the same time, our team is always happy to help customers and strive to solve customer problems in a short time.

Competitive Price
We have long-term services in wholesale Polyurethane catalyst and have established long-term and stable cooperative relationships with many retailers and agents to provide our customers with reasonably priced products.

OEM Available
Our employee team has high R&D capabilities, superb design and development capabilities, skilled manufacturing technology, and rich product application experience, and can also meet OEM business needs.throughout the entire industry chain.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.polyether-factory.com/archives/8477

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Home
E-mail
Products
Search